Back to the main page Back to category Live and Studio Mixers

musical instrument details

Yamaha TF1 Digital Audio Mixing Console NOT x32 Mackie QSC EV Roland Midas

Estimated price for orientation: 1 900 $

Category: Live and Studio Mixers
Class:











Description
Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Type: Mixing Console
Powered/Non-Powered: Non-Powered Brand: Yamaha
Suited For: Front of House (FOH), Home Recording, Monitor, Recording & Live Sound, Stage/Live Sound, Studio/Recording Analog/Digital: Digital


 Faders 17Mixer Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo)Stereo Buses: 1Sub Buses: 1Input Channel Functions: 8 DCA GroupsI/O Inputs: 16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) Outputs: 16 (XLR)Expansion Slots: 1DSP 8 effects + 10 GEQUSB 34 x 34 USB audio interface, 2-track recording via USB storage deviceSampling Frequency 48 kHz, internalSignal Delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHzFaders 100 mm motorized, resolution = 10-bit, +10 to -138 dB, -∞ dB all fadersTotal Harmonic Distortion Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 ohms, INPUT to OMNI OUT, input gain = min. (measured with a -18 dB/octave filter @ 80 kHz)Frequency Response +0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OMNI OUTDynamic Range 110 dB typ., DA converter, 107 dB typ., INPUT to OMNI OUT, input gain = minNoise Equivalent Input Noise:-128 dBu typ., input gain = max. (measured with an A-weight filter) Residual output noise:-85 dBu, ST master off (measured with an A-weight filter)Crosstalk -100 dB (measured with a -30 dB/octave filter @ 22 kHz), adjacent INPUT/OMNI OUT channels, input gain = minPower Requirements 100 - 240 V 50/60 HzPower Consumption 100 WAnalog Inputs Input Terminals: INPUT 1-16, ST IN 1,2 GAIN: -6 dB / +66 dB (INPUT 1-16)Load Impedance: 7.5 kOhms (INPUT 1-16); 10 kOhms (ST IN 1,2) For Use With Nominal: 50 - 600 ohm mics or 600 ohm lines (INPUT 1-16); 600 ohm lines (ST IN 1,2)Sensitivity: -82 dBu (61.6 V), -10 dBu (245 mV) (INPUT 1-16); -30 dBV (31.6 V) (ST IN 1,2) Nominal: -62 dBu (0.616 mV), +10 dBu (2.45 V) (INPUT 1-16); -10 dBV (316 mV) (INPUT 1-16)Max. Before Clip: -42 dBu (6.16 mV), +30 dBu (24.5 V) (INPUT 1-16); +10 dBV (3.16 V) (ST IN 1,2)Connector: Combo Jack (XLR-3-31 type or TRS phone) balanced (INPUT 1-16); RCA pin jack unbalanced (ST IN 1,2)Analog Outputs Output Terminals: OMNI OUT 1-16, PHONESSource Impedance: 75 ohms (OMNI OUT 1-16); 100 ohms (PHONES)For Use With Nominal: 600 ohm lines (OMNI OUT 1-16); 40 ohms (PHONES) GAIN SW: +24 dBu position (default) (OMNI OUT 1-16)Nominal Output Level: +4 dBu (1.23 V) (OMNI OUT 1-16); 3 mW (PHONES)Max. Output Level Before Clip: +24 dBu (12.3 V) (OMNI OUT 1-16); 75 mW (PHONES)Connector: XLR-3-32 type balanced (OMNI OUT 1-16); stereo phone jack (TRS) unbalanced (PHONES)Digital Input/Output Terminals: USB (TO HOST), iPad Format: USB Data length 24-bit (USB TO HOST)Audio: 34 ch input / 34 ch output, PCM (USB TO HOST); Playback: MP3 or WAV file data / Record: WAV file data (iPad)Connector: USB (B type) (USB TO HOST); USB (A type) (iPad)Control I/O Terminals: NETWORK, FOOT SW Format:IEEE802.3 (NETWORK)Level: 10BASE-T/100Base-TX (NETWORK)Connector: RJ-45 (NETWORK); TS Phone (FOOT SW )Dimensions 20.1 x 8.9 x 23.6" (510 x 225 x 599 mm)Net Weight 29.8 lb (13.5 kg)