Back to the main page Back to category Other Guitar Effects Pedals
musical instrument details
Giant Pedalboard With 14 Pedals, MONO case, & Cables Included
Estimated price for orientation: 2 500 $
Category: Other Guitar Effects Pedals
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Alright, so this is my personal pedalboard. I use it twice a week or so and it is completely setup/routed and ready to go! The price is for 13 pedals on a Pedaltrain PRO, a Full-Drive MOSFET 2, all of the cables, a "snake" that I made myself (probably 10' in length), the two power bricks on the back, the included power cable, and the MONO softshell case. Pedals on the board (in the order they are routed): Polytune mini-->Ernie Ball MVP-->Route 66 compressor-->Carl Martin Octa-Switch MK3 { the Octa-Switch has 4 separate pedals in its first 4 loops--TC Electronic Viscous Vibe, TC Electronic MojoMojo, Xotic Effects BB Preamp, and the Kalamazoo LovePedal Black Caucus edition}-->that is all sent from the Octa-Switch to the front of an Amp-->the next Octa-Switch send is sent to an amp's effects loop-->it is then routed through the T-Rex Whirly Verb-->into the Octa-Switch return-->so in the amp's effects loop is the Whirly Verb, Boss DD-20, Digitech Polara, Xotic Effects EP Boost, BBE Sonic Stomp-->from the final Octa-Switch out-->amp's effects loop return. There is chalk pen marks on every pedal (it's a Setting Saver pen) and industrial strength velcro on the back of each as well.I also have the Octa-Switch setup to automatically switch channels on my amp. It is set so Presets 1, 5, & 7 are all using the clean channel. The rest are set to the lead channel. The presets in the Octa-Switch are setup currently as: #1 clean, #2 first gain stage, #3 second gain stage, #4 lead gain stage, #5 clean with Polara added, #6 first gain stage with Polara added, #7 same as 5 but with Vibe added, #8 same as 6 but with Vibe added. The Octa-Switch's LEDs light up when a preset is selected--so it's easy to see which pedals are engaged. In the Octa-Switch the dip switches control which pedals are engaged (all the pedals are on) for every preset--so it is super easy to change these presets to your liking. On the back of the board, there are two power bricks. An MXR Iso-Brick and the Truetone CS7. The MXR has a broken power output in just one spot, but it's not needed for the current setup. It is the back-right output in the picture (9v 100ma).There is a custom built junction box from American Loopers that everything is routed to underneath the board. It has 3 TS outputs and 1 TRS output for channel switching. The included cable snake has tape on each cable labeling where each of them go. It's cheaply made...I literally just cable tied random cables I had laying around together. So they are not all the same length. I will also include a Full-Drive MOSFET 2 as a bonus pedal. The MONO case is awesome and it has a super large pocket on the front. Even though it's technically a softshell case, it protects the board crazy well!
I know this is fairly complicated so please ask questions if needed!
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
Alright, so this is my personal pedalboard. I use it twice a week or so and it is completely setup/routed and ready to go! The price is for 13 pedals on a Pedaltrain PRO, a Full-Drive MOSFET 2, all of the cables, a "snake" that I made myself (probably 10' in length), the two power bricks on the back, the included power cable, and the MONO softshell case. Pedals on the board (in the order they are routed): Polytune mini-->Ernie Ball MVP-->Route 66 compressor-->Carl Martin Octa-Switch MK3 { the Octa-Switch has 4 separate pedals in its first 4 loops--TC Electronic Viscous Vibe, TC Electronic MojoMojo, Xotic Effects BB Preamp, and the Kalamazoo LovePedal Black Caucus edition}-->that is all sent from the Octa-Switch to the front of an Amp-->the next Octa-Switch send is sent to an amp's effects loop-->it is then routed through the T-Rex Whirly Verb-->into the Octa-Switch return-->so in the amp's effects loop is the Whirly Verb, Boss DD-20, Digitech Polara, Xotic Effects EP Boost, BBE Sonic Stomp-->from the final Octa-Switch out-->amp's effects loop return. There is chalk pen marks on every pedal (it's a Setting Saver pen) and industrial strength velcro on the back of each as well.I also have the Octa-Switch setup to automatically switch channels on my amp. It is set so Presets 1, 5, & 7 are all using the clean channel. The rest are set to the lead channel. The presets in the Octa-Switch are setup currently as: #1 clean, #2 first gain stage, #3 second gain stage, #4 lead gain stage, #5 clean with Polara added, #6 first gain stage with Polara added, #7 same as 5 but with Vibe added, #8 same as 6 but with Vibe added. The Octa-Switch's LEDs light up when a preset is selected--so it's easy to see which pedals are engaged. In the Octa-Switch the dip switches control which pedals are engaged (all the pedals are on) for every preset--so it is super easy to change these presets to your liking. On the back of the board, there are two power bricks. An MXR Iso-Brick and the Truetone CS7. The MXR has a broken power output in just one spot, but it's not needed for the current setup. It is the back-right output in the picture (9v 100ma).There is a custom built junction box from American Loopers that everything is routed to underneath the board. It has 3 TS outputs and 1 TRS output for channel switching. The included cable snake has tape on each cable labeling where each of them go. It's cheaply made...I literally just cable tied random cables I had laying around together. So they are not all the same length. I will also include a Full-Drive MOSFET 2 as a bonus pedal. The MONO case is awesome and it has a super large pocket on the front. Even though it's technically a softshell case, it protects the board crazy well!
I know this is fairly complicated so please ask questions if needed!
I know this is fairly complicated so please ask questions if needed!