Back to the main page Back to category Speakers and Monitors
musical instrument details
DEMO QSC K12 12in Powered Loudspeaker with Tote
Estimated price for orientation: 600 $
Category: Speakers and Monitors
Class:
Description Brand: QSC Active/Passive: Active Model: K12 RMS Power: 1000W MPN: K12 Type: PA Speaker UPC: Does not apply
DEMO QSC K12 12in Powered Loudspeaker with ToteFeatures12” Woofer; 1.75” diaphragm compression driver75° conical DMT coverageMaximum SPL 131 dB peakAttractive and professional appearanceRugged ABS enclosures16-gauge powder coated steel grille1000-watt continuous Class D power modules in all modelsFunctions as a monitor wedgeComfortable ergonomic handles35 mm pole sockets with Tilt-Direct™M10 rigging pointsEyebolt and yoke mount accessories availableOnboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP enhances system performance:DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.SPECIFICATIONS K12 Configuration Multipurpose 2-way Transducers
Low-frequency
High-frequency
12" cone transducer
1.75" diaphragm compression driverFrequency Response (-6 dB) 52 Hz - 18 kHz Frequency Range (-10 dB) 48 Hz - 20 kHz Nominal Coverage (-6 dB) 75° conical DMT Maximum SPL1 131 dB peak Amplifiers Power Output2 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak Input Impedance XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼" MIC mode: 2260Ω balanced
RCA: 10 kΩ Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) Indicators Power, Signal A, Signal B, Standby, Limit, Mic Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector Cooling On demand, 50 mm variable speed fan Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ Transducer Protection Thermal limiting, excursion limiting AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz AC Power Consumption
(1/8 of full power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A Enclosure Material Impact resistant ABS Finish Black paint Grille Rugged powder-coated steel Dimensions (HWD) inches 23.7 × 14 × 14 Dimensions (HWD) mm 603 x 356 x 356 Weight (Net) 41 lb / 18.6 kg Available Accessories K12 tote, K12 yoke, M10 Kit-C
***Item is also for sale locally, so Seller reserves the right to end this listing at any time ***
Description
| Brand: | QSC | Active/Passive: | Active |
| Model: | K12 | RMS Power: | 1000W |
| MPN: | K12 | Type: | PA Speaker |
| UPC: | Does not apply |
DEMO QSC K12 12in Powered Loudspeaker with ToteFeatures
***Item is also for sale locally, so Seller reserves the right to end this listing at any time ***
12” Woofer; 1.75” diaphragm compression driver75° conical DMT coverageMaximum SPL 131 dB peakAttractive and professional appearanceRugged ABS enclosures16-gauge powder coated steel grille
1000-watt continuous Class D power modules in all modelsFunctions as a monitor wedgeComfortable ergonomic handles35 mm pole sockets with Tilt-Direct™M10 rigging pointsEyebolt and yoke mount accessories available
Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP enhances system performance:DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.| SPECIFICATIONS | K12 |
| Configuration | Multipurpose 2-way |
| Transducers Low-frequency High-frequency | 12" cone transducer 1.75" diaphragm compression driver |
| Frequency Response (-6 dB) | 52 Hz - 18 kHz |
| Frequency Range (-10 dB) | 48 Hz - 20 kHz |
| Nominal Coverage (-6 dB) | 75° conical DMT |
| Maximum SPL1 | 131 dB peak |
| Amplifiers | |
| Power Output2 | 1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
| Input Impedance | XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced XLR / ¼" MIC mode: 2260Ω balanced RCA: 10 kΩ |
| Controls | Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors | Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling | On demand, 50 mm variable speed fan |
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection | Thermal limiting, excursion limiting |
| AC Power Input | Universal power supply 100–240 VAC, 50 to 60 Hz |
| AC Power Consumption (1/8 of full power) | 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A |
| Enclosure | |
| Material | Impact resistant ABS |
| Finish | Black paint |
| Grille | Rugged powder-coated steel |
| Dimensions (HWD) inches | 23.7 × 14 × 14 |
| Dimensions (HWD) mm | 603 x 356 x 356 |
| Weight (Net) | 41 lb / 18.6 kg |
| Available Accessories | K12 tote, K12 yoke, M10 Kit-C |