Back to the main page Back to category ARP Odyssey 2800 Keyboard Synthe
musical instrument details
ARP AXXE and AVATAR Analog Synthesizer
Estimated price for orientation: 2 000 $
Category: ARP Odyssey 2800 Keyboard Synthe
Class:
Description Brand: ARP MPN: Does Not Apply Type: Synthesizer Country/Region of Manufacture: United States UPC: Does not apply
Old transistor 2n606/2n5172 has been changed for new 2n3904/06all defect IC has been changed by new (ca3080, CA3086, lm1358, lm3900 ..)
LM301 has been changed by new TL081 (Compensation cap removed) New oversized power supply with modern component (lm317/337) and separate power supply for the LED
with modern component (lm317) with 1 toroidal transformer +/-15v + 1 toroidal transformer +5v for Avatar
and 1 R-CORE transformer +/- 15 and +5v for Axxe With Queensland Walnut raw wood veneer panels Specific Avatar Modifications Included : Correction on the 4075 VCF which cut off frequencies above 12kHz
37 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. The guitar part (Board E and D) are present and fonctionnel, but not used in this configuration.
The Guitar microphone is included. The connector are changed for a less expansive one (DIN 6, the same as input of the avatar) Board D power supply connector are not connected (Reduce consumption).
- the Portamento, Guitar vol slides , and switchs string select has no effectTwo modifications are been made to allow the adjustment of both oscillators pitch to tune with another instrument :
- the Triger sensibility is used for a (reverse Log) pitch adjustment
- the 3 positions switch Env Follow is used to an approximatively +/- 2 octave pitch adjustment New VCF AM4023 Filter12dB Low Pass Due to the configuration of the Axxe slider the resonance are inverted (low on the top) and to have a maximum resonance,
the settings of Q is very hight, that will take the filter in oscillation depending of the frequency and the reso. 23 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. All IC excepted VCO, are on sockets for easy change. You can see somes functionals tests on video : As you can see on the viedeo it's fully functional, but as is an old synth (seventies) ,
he has signs of wear typical for this age, but nothing bad.I can't assume guarantee and it's seell AS IS with no return. Shipping:
Shipping is expansive, I done a simulation on USPS for TX to CA and the price for usps ground
ith insurance is around 180$ each (26lb and 50x20x9 inchs). I propose you to pay 180$ each, to choose your shipping company (USPS,UPS, FEDEX...)
and options (insurance) in the limit of 360$ and I will reimburse you by paypal the difference if the cost is less.
Description
| Brand: | ARP | MPN: | Does Not Apply |
| Type: | Synthesizer | Country/Region of Manufacture: | United States |
| UPC: | Does not apply |
Old transistor 2n606/2n5172 has been changed for new 2n3904/06all defect IC has been changed by new (ca3080, CA3086, lm1358, lm3900 ..)
LM301 has been changed by new TL081 (Compensation cap removed) New oversized power supply with modern component (lm317/337) and separate power supply for the LED
with modern component (lm317) with 1 toroidal transformer +/-15v + 1 toroidal transformer +5v for Avatar
and 1 R-CORE transformer +/- 15 and +5v for Axxe With Queensland Walnut raw wood veneer panels Specific Avatar Modifications Included : Correction on the 4075 VCF which cut off frequencies above 12kHz
37 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. The guitar part (Board E and D) are present and fonctionnel, but not used in this configuration.
The Guitar microphone is included. The connector are changed for a less expansive one (DIN 6, the same as input of the avatar) Board D power supply connector are not connected (Reduce consumption).
- the Portamento, Guitar vol slides , and switchs string select has no effectTwo modifications are been made to allow the adjustment of both oscillators pitch to tune with another instrument :
- the Triger sensibility is used for a (reverse Log) pitch adjustment
- the 3 positions switch Env Follow is used to an approximatively +/- 2 octave pitch adjustment New VCF AM4023 Filter12dB Low Pass Due to the configuration of the Axxe slider the resonance are inverted (low on the top) and to have a maximum resonance,
the settings of Q is very hight, that will take the filter in oscillation depending of the frequency and the reso. 23 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. All IC excepted VCO, are on sockets for easy change. You can see somes functionals tests on video : As you can see on the viedeo it's fully functional, but as is an old synth (seventies) ,
he has signs of wear typical for this age, but nothing bad.I can't assume guarantee and it's seell AS IS with no return. Shipping:
Shipping is expansive, I done a simulation on USPS for TX to CA and the price for usps ground
ith insurance is around 180$ each (26lb and 50x20x9 inchs). I propose you to pay 180$ each, to choose your shipping company (USPS,UPS, FEDEX...)
and options (insurance) in the limit of 360$ and I will reimburse you by paypal the difference if the cost is less.
LM301 has been changed by new TL081 (Compensation cap removed) New oversized power supply with modern component (lm317/337) and separate power supply for the LED
with modern component (lm317) with 1 toroidal transformer +/-15v + 1 toroidal transformer +5v for Avatar
and 1 R-CORE transformer +/- 15 and +5v for Axxe With Queensland Walnut raw wood veneer panels Specific Avatar Modifications Included : Correction on the 4075 VCF which cut off frequencies above 12kHz
37 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. The guitar part (Board E and D) are present and fonctionnel, but not used in this configuration.
The Guitar microphone is included. The connector are changed for a less expansive one (DIN 6, the same as input of the avatar) Board D power supply connector are not connected (Reduce consumption).
- the Portamento, Guitar vol slides , and switchs string select has no effectTwo modifications are been made to allow the adjustment of both oscillators pitch to tune with another instrument :
- the Triger sensibility is used for a (reverse Log) pitch adjustment
- the 3 positions switch Env Follow is used to an approximatively +/- 2 octave pitch adjustment New VCF AM4023 Filter12dB Low Pass Due to the configuration of the Axxe slider the resonance are inverted (low on the top) and to have a maximum resonance,
the settings of Q is very hight, that will take the filter in oscillation depending of the frequency and the reso. 23 new sliders, Bourns PTL serie with led. Each color has an individually adjustable trimmer to adjust the brightness. The colors are according to the color code of the Odyssey. All IC excepted VCO, are on sockets for easy change. You can see somes functionals tests on video : As you can see on the viedeo it's fully functional, but as is an old synth (seventies) ,
he has signs of wear typical for this age, but nothing bad.I can't assume guarantee and it's seell AS IS with no return. Shipping:
Shipping is expansive, I done a simulation on USPS for TX to CA and the price for usps ground
ith insurance is around 180$ each (26lb and 50x20x9 inchs). I propose you to pay 180$ each, to choose your shipping company (USPS,UPS, FEDEX...)
and options (insurance) in the limit of 360$ and I will reimburse you by paypal the difference if the cost is less.