Back to the main page Back to category Pedals
musical instrument details
MOOG TAURUS III BASS PEDAL - #T3-1021 PRO AUDIO - AUDIOFILES ATTENTION!
Estimated price for orientation: 2 500 $
Category: Pedals
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: MOOG Model: T3 Instrument: BASS PEDAL Country/Region of Manufacture: United States Type: TAURUS III
RARLY USED, LIKE NEW. STUDIO USAGE ONLYONLY 1500 OF THESE WERE MADE/SOLD WORLD WIDE - 13-note velocity sensitive bass pedals1 Volume Footwheel Controller with optical mechanism1 Programmable Footwheel Controller with optical mechanism9 Footswitches for selecting Bank and Presets, Transpose, Glide On/Off, Decay On/Off, and Octave Up/DownSynthesizer Sound Engine100% Analog Audio signal path based entirely on the highly acclaimed Taurus I synthesizer circuits2 x VCOs (Voltage Controlled Oscillators) with sawtooth waveform outputs1 x VCF (Voltage Controlled Filter) with 24dB/Octave Lowpass Filter with the classic Moog Ladder Filter topology. 20Hz-20KHz Frequency Response1 x VCA (Voltage Controlled Amplifier)Synthesizer Modifiers1 ASD (Attack-Sustain-Decay) VCA Envelope1 AD (Attack-Sustain-Decay) VCF Envelope1 x LFO (Low Frequency Oscillator) with Triangle, Square, Sawtooth, and Ramp waveforms with adjustable amounts to the VCOs and VCF. The LFO is syncable to MIDI Clock or Tap Tempo1 x Arpeggiator with Latch Mode for generating recurring musical patterns from Bass Pedal Input. The Arpeggiator is syncable to MIDI Clock or Tap TempoProgramming Interface52 Presets total in non-volatile memory consisting of one bank of 4 factory presets, and 12 banks of 4 user-programmable presetsPreset selection can be performed with the Value knob, or the combination of Bank footswitch, Bass Pedal, and Preset footswitchFactory Presets include the classic Taurus, Bass, and Tuba presets, plus the new Taurus III presetTwo selectable levels of LED illuminated switches access the classic Taurus parameters or the Taurus 3 LFO and Arpeggiator parameters for editing with the Control Foot wheel or the Value Knob15-segment LED bargraph displays the value of the currently selected parameterClassic Taurus Parameters in the OSCILLATOR sectionB.FREQ: Oscillator B Frequency coarse offset to Oscillator ABEAT: Oscillator B Frequency fine offset to Oscillator AGLIDE: Glide RateOCTAVE: Low, Medium or HighMIX: sets the loudness ratio between Oscillators A and BATTACK: sets the Rise time for the VCA Envelope Generator when a note is playedSUSTAIN: sets the maximum level for the VCA Envelope Generator when a note is heldDECAY: sets the fall time for the VCA Envelope Generator when a note is releasedClassic Taurus Parameters in the FILTER sectionCUTOFF: sets the lowpass filter cutoff frequencyRESONANCE: sets the amount of signal fed from the output to the input of the lowpass filter. Can be set for filter self-oscillationATTACK: sets the Rise time for the VCF Envelope Generator when a note is playedDECAY: sets the fall time for the VCF Envelope Generator when a note is releasedAMOUNT: sets how much the VCF cutoff frequency is modified by the VCF Envelope Generator signalTaurus 3 Parameters in the LFO SectionSQUARE: Radio button type switch selects the LFO square waveformTRIANGLE: Radio button type switch selects the LFO triangle waveformRAMP: Radio button type switch selects the LFO ramp waveformSAW: Radio button type switch selects the LFO sawtooth waveformRATE: sets the LFO RateLFO FILTER AMOUNT: sets the amount the LFO modulates the filter cutoff frequencyLFO PITCH AMOUNT: sets the amount the LFO modulates the VCOs frequenciesLFO SYNC: On/Off switch enables starting the LFO waveform cycle with each note played on the Bass PedalsTaurus 3 Parameters in the ARPEGGIATOR SectionPATTERN: sets the pattern of the arpeggiatorORDER: sets the order that the pattern of the arpeggiator is outputOCTAVE: sets the number of octaves for the arpeggiator patternON/OFF: turns the arpeggiator on or offLATCH: turns the arpeggiator latch function on or offVALUE knob is used for selecting presets or editing parametersPRESET switch toggles between the current stored preset and its edited formMASTER switch selects a menu of Advanced Preset functions, Global settings, and System UtilitiesCURSOR switch navigates the screen of the LCD User InterfaceSTORE switch initiates the storing of presetsField-upgradeable firmware using MIDI SysExMIDI ImplementationPresets selectable by MIDI Program Change messagesTaurus Sound engine can be played by MIDI Note messagesPreset parameters controllable by MIDI Control Change (CC) messagesBass pedals transmit MIDI Note On/Note Off messages with user selectable velocity resolutionVolume Footwheel transmits MIDI CC 7 (Volume) dataControl Footwheel transmits MIDI CC corresponding to selected parameterPresets and Global Settings can be sent or received through MIDI SysExI/O panelHI-Z Output: output jack outputs the Taurus audio signal from the classic higher impedance Taurus output stage. For use with Bass Amplifier instrument inputsLO-Z Output: output jack outputs the Taurus audio signal from a low impedance output stage. For use with line-level inputsPITCH CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCOs frequenciesFILTER CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCF cutoff frequencyVOLUME CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCA gainGATE Input: input jack accepts +5V gate signal for triggering the Taurus EGsMIDI In: standard DIN MIDI input connectorMIDI Out: standard DIN MIDI output connectorUSB: bi-directional USB MIDI portPower Inlet: IEC connector accepts 90-250V AC 50-60 HzPower Switch: turns unit On or OffChassis SpecificationsRugged metal enclosure with steel feet, front panel, structural panels and extruded aluminum back panelWeight: 45lbsDimensions: 25" wide X 24" deep X 8 1/2" high
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | MOOG |
| Model: | T3 | Instrument: | BASS PEDAL |
| Country/Region of Manufacture: | United States | Type: | TAURUS III |
RARLY USED, LIKE NEW. STUDIO USAGE ONLYONLY 1500 OF THESE WERE MADE/SOLD WORLD WIDE - 13-note velocity sensitive bass pedals1 Volume Footwheel Controller with optical mechanism1 Programmable Footwheel Controller with optical mechanism9 Footswitches for selecting Bank and Presets, Transpose, Glide On/Off, Decay On/Off, and Octave Up/DownSynthesizer Sound Engine100% Analog Audio signal path based entirely on the highly acclaimed Taurus I synthesizer circuits2 x VCOs (Voltage Controlled Oscillators) with sawtooth waveform outputs1 x VCF (Voltage Controlled Filter) with 24dB/Octave Lowpass Filter with the classic Moog Ladder Filter topology. 20Hz-20KHz Frequency Response1 x VCA (Voltage Controlled Amplifier)Synthesizer Modifiers1 ASD (Attack-Sustain-Decay) VCA Envelope1 AD (Attack-Sustain-Decay) VCF Envelope1 x LFO (Low Frequency Oscillator) with Triangle, Square, Sawtooth, and Ramp waveforms with adjustable amounts to the VCOs and VCF. The LFO is syncable to MIDI Clock or Tap Tempo1 x Arpeggiator with Latch Mode for generating recurring musical patterns from Bass Pedal Input. The Arpeggiator is syncable to MIDI Clock or Tap TempoProgramming Interface52 Presets total in non-volatile memory consisting of one bank of 4 factory presets, and 12 banks of 4 user-programmable presetsPreset selection can be performed with the Value knob, or the combination of Bank footswitch, Bass Pedal, and Preset footswitchFactory Presets include the classic Taurus, Bass, and Tuba presets, plus the new Taurus III presetTwo selectable levels of LED illuminated switches access the classic Taurus parameters or the Taurus 3 LFO and Arpeggiator parameters for editing with the Control Foot wheel or the Value Knob15-segment LED bargraph displays the value of the currently selected parameterClassic Taurus Parameters in the OSCILLATOR sectionB.FREQ: Oscillator B Frequency coarse offset to Oscillator ABEAT: Oscillator B Frequency fine offset to Oscillator AGLIDE: Glide RateOCTAVE: Low, Medium or HighMIX: sets the loudness ratio between Oscillators A and BATTACK: sets the Rise time for the VCA Envelope Generator when a note is playedSUSTAIN: sets the maximum level for the VCA Envelope Generator when a note is heldDECAY: sets the fall time for the VCA Envelope Generator when a note is releasedClassic Taurus Parameters in the FILTER sectionCUTOFF: sets the lowpass filter cutoff frequencyRESONANCE: sets the amount of signal fed from the output to the input of the lowpass filter. Can be set for filter self-oscillationATTACK: sets the Rise time for the VCF Envelope Generator when a note is playedDECAY: sets the fall time for the VCF Envelope Generator when a note is releasedAMOUNT: sets how much the VCF cutoff frequency is modified by the VCF Envelope Generator signalTaurus 3 Parameters in the LFO SectionSQUARE: Radio button type switch selects the LFO square waveformTRIANGLE: Radio button type switch selects the LFO triangle waveformRAMP: Radio button type switch selects the LFO ramp waveformSAW: Radio button type switch selects the LFO sawtooth waveformRATE: sets the LFO RateLFO FILTER AMOUNT: sets the amount the LFO modulates the filter cutoff frequencyLFO PITCH AMOUNT: sets the amount the LFO modulates the VCOs frequenciesLFO SYNC: On/Off switch enables starting the LFO waveform cycle with each note played on the Bass PedalsTaurus 3 Parameters in the ARPEGGIATOR SectionPATTERN: sets the pattern of the arpeggiatorORDER: sets the order that the pattern of the arpeggiator is outputOCTAVE: sets the number of octaves for the arpeggiator patternON/OFF: turns the arpeggiator on or offLATCH: turns the arpeggiator latch function on or offVALUE knob is used for selecting presets or editing parametersPRESET switch toggles between the current stored preset and its edited formMASTER switch selects a menu of Advanced Preset functions, Global settings, and System UtilitiesCURSOR switch navigates the screen of the LCD User InterfaceSTORE switch initiates the storing of presetsField-upgradeable firmware using MIDI SysExMIDI ImplementationPresets selectable by MIDI Program Change messagesTaurus Sound engine can be played by MIDI Note messagesPreset parameters controllable by MIDI Control Change (CC) messagesBass pedals transmit MIDI Note On/Note Off messages with user selectable velocity resolutionVolume Footwheel transmits MIDI CC 7 (Volume) dataControl Footwheel transmits MIDI CC corresponding to selected parameterPresets and Global Settings can be sent or received through MIDI SysExI/O panelHI-Z Output: output jack outputs the Taurus audio signal from the classic higher impedance Taurus output stage. For use with Bass Amplifier instrument inputsLO-Z Output: output jack outputs the Taurus audio signal from a low impedance output stage. For use with line-level inputsPITCH CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCOs frequenciesFILTER CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCF cutoff frequencyVOLUME CV Input: TRS jack accepts expression pedal (such as Moog EP-2) or 0V to +5V Control Voltage inputs for modifying the VCA gainGATE Input: input jack accepts +5V gate signal for triggering the Taurus EGsMIDI In: standard DIN MIDI input connectorMIDI Out: standard DIN MIDI output connectorUSB: bi-directional USB MIDI portPower Inlet: IEC connector accepts 90-250V AC 50-60 HzPower Switch: turns unit On or OffChassis SpecificationsRugged metal enclosure with steel feet, front panel, structural panels and extruded aluminum back panelWeight: 45lbsDimensions: 25" wide X 24" deep X 8 1/2" high