| | | Audio-Technica AT4050 Condenser Microphone with Zoom UAC-2 Audio Converter and Cable | | | This is a no hassle BUY IT NOW listing for your convenience with FREE SHIPPING in the continental United States! | | | | Brand New Audio Technica AT4050 with Full Factory WarrantyStudio Condenser MicrophoneRetail Price: $895.00Includes:
(1) AT4050 Studio Condenser Microphone
(1) Shock Mount
(1) Dust Cover
(1) Protective Carrying Case | |
Click on an image to open in new window |
| | | Description | | Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. | | | Features: | Specifications: | | Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more. Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest qualityDual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphoneThe 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of useThree switchable polar patterns: omni, cardioid, figure-of-eightTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsState-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standardsSwitchable 80 Hz hi-pass filter and 10 dB padCustom shock mount provides superior isolation | ELEMENT: Externally-polarized (DC bias) condenserPOLAR PATTERNS: Cardioid, Omnidirectional, Figure-of-eightFREQUENCY RESPONSE: 20-18,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 PaIMPEDANCE: 100 ohmsMAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)NOISE: 17 dBDYNAMIC RANGE (TYPICAL): 132 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typicalSWITCHES: Polar selection; Flat, roll-off; 10 dB pad (nominal)WEIGHT: 18.0 oz (510 g)DIMENSIONS: 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameterOUTPUT CONNECTORS: Integral 3-pin XLRM-typeACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying caseAUDIO-TECHNICA CASE STYLE: R1 | |
| | Brand New Zoom UAC-2 with Full Factory WarrantyUSB 3.0 SuperSpeed Audio Converter for Mac and PCRetail Price: $329.99Includes:
(1) Zoom UAC-2 USB 3.0 Audio Converter
(1) 1m USB 3.0 Cable
(1) Cubase LE Download
(1) Cubase LE Startup Guide
(1) Operator's Instructions | | | Click on an image to open in new window |
| | | Description | Take your sound new heights with the high-speed, high-resolution, low-latency, and ultra-portable UAC-2 USB 3.0 SuperSpeed Audio converter.The bus-powered UAC-2 adds two channels of 24-bit/192 kHz high-resolution audio to any USB 2.0 or 3.0-equipped Windows or Mac computer—even to your iPad.* It utilizes USB 3.0 SuperSpeed technology for low latency and includes advanced features such as 4x upsampling, Loopback, and MIDI I/O. Plug in any microphone, line-level device, or instrument and use the UAC-2 for onstage playback, recording to a DAW, or enjoyment of high-res audio in your home or office. You can also use it for fast, low-latency podcasting, gaming, and other live streaming applications.Live performance
Now you can get the best out of your laptop at every gig. The UAC-2 is portable, bus-powered (no AC connection required), and built rugged for the road, plus its advanced converters and support for USB 3.0 SuperSpeed ensures superior audio wherever your music takes you.Webcasting, podcasting, gaming, and live-streaming
Broadcast your creativity, enhance your gaming experience, and share your performance with the world. The UAC-2's Loopback function combines the input from connected mics, instruments, and line-level devices along with background music or other audio tracks being played back by your computer and then instantly routes a custom blend of the signals to your streaming software.Recording and archiving
Pair a UAC-2 with your DAW and create great audio in any recording environment. Connect a wide variety of microphones, line-level devices, and instruments. Use Direct Monitoring for zero-latency overdubbing. Sync your MIDI controllers, sound modules, and drum machines. Archive your favorite recordings in high-resolution formats. The UAC-2 provides everything you need, in one compact device.Desktop audio enhancement
Think your headphones and speakers already sound pretty great? Treat yourself by plugging them into the UAC-2 instead of your computer's audio outputs. Now you can enjoy the ultimate in streamed high-resolution audio—all the way up to 24-bit/192 kHz—in full fidelity.Complete connectivity
The UAC-2 works with everything from legacy USB 2.0 laptops and desktops, all the way up to the latest-generation Mac or Windows USB 3.0-equipped computers. Or plug in an AC adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter (sold separately) and use it with your iPad.MIDI
The UAC-2's MIDI input and output connectors ensure rock-solid synchronization between your computer and devices such as electronic keyboards, controllers, drum machines, and synthesizer or sampler modules.USB 3.0 SuperSpeed
The USB 3.0 SuperSpeed transfer protocol supported by the UAC-2 is ten times faster than USB 2.0 and six times faster than FireWire 800. The result? Low-latency (2.2ms roundtrip @ 96 kHz/32 samples) for improved performance from your DAW software, and a stable data stream that is unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. What's more, the extra bus voltage carried by USB 3.0 (900 mA, as opposed to the 500 mA carried by USB 2.0) allows for the use of higher-end electronic components such as the advanced preamps and converters in the UAC-2.The Hardware
The USB 3.0 connector on the rear panel carries digital signal to and from your computer in addition to providing power to the UAC-2—no batteries or external power required. Dual front panel combo XLR/TRS inputs allow you to connect a wide variety of microphones as well as line-level signals from electronic keyboards and music players—even passive instruments such as electric guitars and basses. Dual-balanced TRS output jacks enable you to connect the UAC-2 to amplifiers or self-powered speakers, and there's an independent ¼" stereo headphone jack with dedicated volume control for private monitoring of the input or output signal.Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a large Output knob enables fast control over overall output level. A phantom power switch applies +48 volts to the mic inputs, allowing you to use the UAC-2 with studio-quality condenser microphones, and a three-way Direct Monitoring switch enables monitoring of input signal with zero latency in both mono and stereo. MIDI In and Out connectors allow interfacing with devices such as electronic keyboards and drum machines. Upsampling
The UAC-2 uses high-end components such as the Burr Brown PCM4202 analog-to-digital converter and AKM AK4396 digital-to-analog converter. In addition, the UAC-2 performs 4-times upsampling during both analog-to-digital (A/D) and digital-to-analog (D/A) conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-2 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. | | | Features: | Specifications: | | 2-in/2-out USB 3.0 SuperSpeed audio interfaceSupport for recording and playback up to 24-bit/192 kHzLoopback function for webcasting, podcasting, gaming, and other live streaming applicationsLow latency overdubbing and direct monitoring for zero-latency monitoring in mono or stereoTwo combo balanced XLR/TRS input connectors accept both mic- and line-level signalHi-Z switches allow direct connection of electric guitar or bassSwitchable +48V phantom powerTwo balanced TRS output jacks for connection to amplifiers or self-powered speakers¼" headphone jack with dedicated level controlIndependent gain controls and clip LEDs for each inputLarge knob output volume controlDirect Monitoring switch for zero latency monitoring in mono or stereoMIDI In and OutCompatible with all popular DAW and streaming software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and othersHigh-performance mic preamps with up to +60dB of amplification120dB of dynamic range4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelityAsynchronous transfer system unaffected by computer jitterBus powered—no AC power requiredRobust metal housing ensures roadworthinessWorks with all USB 3.0-equipped computers and iPads (Optional power adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter required) | Input 1/2 connectors: XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot)Input gain: 0 to 60dB in 1dB stepsInput impedance: 5kOhm (1 MOhm (when Hi-Z ON)Maximum input level: +12 dBu (@0dBFs)Phantom power: +48VL/R OUTPUT Type: ¼" TRS jack (Balanced)L/R OUTPUT Maximum output level: +14 dBu (@0dBFs)L/R OUTPUT Output impedance: 100OhmPHONES OUTPUT Type: ¼" stereo phone jack, 20mW + 20mW (into 32O load)PHONES OUTPUT Maximum output level: +8 dBu (@0dBFs)PHONES OUTPUT Output impedance: 33OhmDYNAMIC RANGE: A/D: 118dB typical (IHF-A), D/A:120dB typical (IHF-A)NUMBER OF AUDIO CHANNEL, Recording: 2NUMBER OF AUDIO CHANNEL, Playback: 2Frequency characteristics: -1.0 dB: 20 Hz - 60 kHz @ 192kHz, -1.0 dB: 20 Hz - 40 kHz @ 96kHz, -1.0 dB: 20 Hz - 20 kHz @ 44.1kHzMeasured conversion noise (EIN): -125dBu (IHF-A) @ 60dB, 150Ohm inputSampling frequencies: 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHzBit depth: 24-bitInterface: USB 3.0MIDI In/Out: 5-pin DIN jackPower source: USB 3.0 Bus Power / AD-14 AC adapter (DC 5V 1A)Dimensions: 113.9mm(D) x 176.0mm(W) x 46.2mm (H) | |
| | Brand New Hosa MBL-110 with Full Factory WarrantyStandard Microphone CableRetail Price: $13.65Includes:
(1) Hosa 10' Standard Mic Cable |
| | | Description | | Standard 10 ft. Microphone Cable. | | | Features: | Specifications: | | Use to connect mics to mic preamps and mixing consolesBlack connectors disappear on stageA cost-effective solution for light- and medium-duty applications | Length: 10 ft.Conductor: 22 AWG X 2Shield: OFC BraidConnectors: Hosa Pro Black | |
| | | Return Policy:
We want you to be completely satisfied with your purchase from FP Logistics on eBay. Most unused merchandise in re-sellable condition with all original packaging and accessories may be returned for a refund within 30 days of purchase. In the event that you want to return your purchase to FP Logistics, please use the "Return this item" button from your eBay order history.Re-stocking Fees and Shipping Charges
All returns are subject to a re-stocking fee. Any shipping and handling charges are non-refundable.Partial Returns
To be eligible for a refund, all of the items included with the purchase must be returned. In the case of an incomplete return, no refund will be given. Non-Returnable Items
There are a few item types that are not eligible for return. Please refer to this specific product's return policy in the "Shipping and Payments" tab for full details. |
| 