Back to the main page Back to category Amplifiers
musical instrument details
(2) NEW! RMX 5050 5000 WATT STEREO PROFESSIONAL POWER AMPLIFIER
Estimated price for orientation: 1 869 $
Category: Amplifiers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: RMX 5050 Number of Channels: 2 MPN: QSC Form Factor: Rack-Mountable Model: BORTEC LAB Type: Power Amplifier RMS Power: 3600
PLEASE CHECK OUT OUR STORE FOR MORE GREAT PRICES ON TOURING AMPS, DSP AMPS, LINE-ARRAYS, SUBWOOFERS AND MUCH MORE! THIS LISTING IS FOR 2 110v RMX5050 AMPLIFIERSRMX 5050 H CLASS PROFESSIONAL POWER AMPLIFIER by Bortec LabCOMES WITH OUR 3 YEAR FACTORY WARRANTY. 30 DAYS FULL REPLACEMENT WARRANTY.SPECIFICATIONS Output Circuit Type complementary bipolar output with multi-step high efficiency circuit Output Power in watts RMX 4050HD RMX 5050 FTC: 20 Hz to 20 kHz, 0.1% THD 8 ohms 800 1050 both channels driven 4 ohms 1300 1600 2 ohms 1600 2000 EIA: 1 kHz, 0.1% THD 8 ohms 850 1100 both channels driven 4 ohms 1400 1800 2 ohms, 1% THD 2000 2500 Bridged Mode 8 ohms, 20 Hz to 20 kHz 2600 3200 at 0.1% THD 8 ohms, 1 kHz 2800 3600 4 ohms, 1 kHz, 1% THD 4000 5000 Input Sensitivity for rated power into 8 ohms 1.25 Vrms 1.42 Vrms Input Impedance 20 k ohm balanced, 10 k ohm unbalanced Voltage Gain 64x (36 dB) for 8 ohm load Dynamic Headroom at 4 ohms 2 dB Distortion, SMPTE <0.02% Frequency response at 1 watt 20 Hz to 20 kHz, 8 ohms, LF Filter bypassed: +0, -1 dB 5 Hz to 50 kHz, 8 ohms, LF Filter bypassed: +0, -3 dB Damping Factor >250, 8 ohm load Noise (unweighted) 100 dB below rated output from 20 Hz to 20 kHz, 8 ohm load Controls Front Panel- AC power switch, CH1 Gain control, CH2 Gain control Rear Panel- 10-pole DIP switch featuring LF Filter on/off, LF Filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge Mode. Push-button circuit breaker for each channel. Connectors Inputs: XLR female, TRS (1/4-inch), and barrier-strip screw terminals provided for each channel Outputs: binding posts and Speakon outputs (CH1 Speakon wired for bi-amp connection) LED Indicators Power “on”, green; Protect, red; Signal -35 dB, yellow (1 each channel); Clip, red (1 each channel) Cooling continuously variable speed fan, rear to front airflow Amplifier Protection short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into reactive/mismatched loads Load Protection turn-on and turn-off muting, DC fault output crowbar Power Requirements 100, 120, or 240 Volts AC (±10%) 50-60 Hertz Circuit Breakers RMX 4050HD: two (one for each channel): 100 and 120 V models: 15 amp / 230 V models: 8 amp RMX 5050: two (one for each channel): 100 and 120 V models: 20 amp / 230 V models: 10 amp AC Connection detachable 3-conductor grounded, Class 1 type Current Consumption at 120V (in amperes) at typical/full/maximum output power (idle current= 1 amp) RMX 4050HD RMX 5050 8 ohms typical= 6.4, full= 12.5, maximum= 25.5 typical= 8.7, full= 17.0, maximum= 34.4 4 ohms typical= 10.0, full= 20.1, maximum= 42.2 typical= 13.9, full= 26.9, maximum= 56.4 2 ohms typical= 14.5, full= 30.6, maximum= 65.7 typical= 18.9, full= 38.0, maximum= 84.7 Current Consumption Notes:Typical- 1/8 power, pink noise, represents typical program with occasional clipping. Full- 1/3 power, pink noise, represents severe program with heavy clipping. Maximum- continuous sine wave at 1% clipping. AC Inlet: IEC 6032 C13 IEC 6023 C19 Supplied Cord Set 120V: 8ft (2.5m), NEMA 5-15 plug 120V: 8ft(2.5m), NEMA 5-20 plug 230V: 8ft(2.5m), CEE7/7 plug 230V: 8ft(2.5m), CEE7/7 plug Weight 68 lb. (30.8 kg) net, 77 lb. (34.9 kg) shipping 75 lb. (33.1 kg) net, 87 lb. (37.2 kg) shipping Dimensions 19.0” wide x 5.2” (3RU) high x 15.9” deep (482x132x404mm)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | RMX 5050 |
| Number of Channels: | 2 | MPN: | QSC |
| Form Factor: | Rack-Mountable | Model: | BORTEC LAB |
| Type: | Power Amplifier | RMS Power: | 3600 |
PLEASE CHECK OUT OUR STORE FOR MORE GREAT PRICES ON TOURING AMPS, DSP AMPS, LINE-ARRAYS, SUBWOOFERS AND MUCH MORE! THIS LISTING IS FOR 2 110v RMX5050 AMPLIFIERSRMX 5050 H CLASS PROFESSIONAL POWER AMPLIFIER by Bortec LabCOMES WITH OUR 3 YEAR FACTORY WARRANTY. 30 DAYS FULL REPLACEMENT WARRANTY.SPECIFICATIONS Output Circuit Type complementary bipolar output with multi-step high efficiency circuit Output Power in watts RMX 4050HD RMX 5050 FTC: 20 Hz to 20 kHz, 0.1% THD 8 ohms 800 1050 both channels driven 4 ohms 1300 1600 2 ohms 1600 2000 EIA: 1 kHz, 0.1% THD 8 ohms 850 1100 both channels driven 4 ohms 1400 1800 2 ohms, 1% THD 2000 2500 Bridged Mode 8 ohms, 20 Hz to 20 kHz 2600 3200 at 0.1% THD 8 ohms, 1 kHz 2800 3600 4 ohms, 1 kHz, 1% THD 4000 5000 Input Sensitivity for rated power into 8 ohms 1.25 Vrms 1.42 Vrms Input Impedance 20 k ohm balanced, 10 k ohm unbalanced Voltage Gain 64x (36 dB) for 8 ohm load Dynamic Headroom at 4 ohms 2 dB Distortion, SMPTE <0.02% Frequency response at 1 watt 20 Hz to 20 kHz, 8 ohms, LF Filter bypassed: +0, -1 dB 5 Hz to 50 kHz, 8 ohms, LF Filter bypassed: +0, -3 dB Damping Factor >250, 8 ohm load Noise (unweighted) 100 dB below rated output from 20 Hz to 20 kHz, 8 ohm load Controls Front Panel- AC power switch, CH1 Gain control, CH2 Gain control Rear Panel- 10-pole DIP switch featuring LF Filter on/off, LF Filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge Mode. Push-button circuit breaker for each channel. Connectors Inputs: XLR female, TRS (1/4-inch), and barrier-strip screw terminals provided for each channel Outputs: binding posts and Speakon outputs (CH1 Speakon wired for bi-amp connection) LED Indicators Power “on”, green; Protect, red; Signal -35 dB, yellow (1 each channel); Clip, red (1 each channel) Cooling continuously variable speed fan, rear to front airflow Amplifier Protection short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into reactive/mismatched loads Load Protection turn-on and turn-off muting, DC fault output crowbar Power Requirements 100, 120, or 240 Volts AC (±10%) 50-60 Hertz Circuit Breakers RMX 4050HD: two (one for each channel): 100 and 120 V models: 15 amp / 230 V models: 8 amp RMX 5050: two (one for each channel): 100 and 120 V models: 20 amp / 230 V models: 10 amp AC Connection detachable 3-conductor grounded, Class 1 type Current Consumption at 120V (in amperes) at typical/full/maximum output power (idle current= 1 amp) RMX 4050HD RMX 5050 8 ohms typical= 6.4, full= 12.5, maximum= 25.5 typical= 8.7, full= 17.0, maximum= 34.4 4 ohms typical= 10.0, full= 20.1, maximum= 42.2 typical= 13.9, full= 26.9, maximum= 56.4 2 ohms typical= 14.5, full= 30.6, maximum= 65.7 typical= 18.9, full= 38.0, maximum= 84.7 Current Consumption Notes:Typical- 1/8 power, pink noise, represents typical program with occasional clipping. Full- 1/3 power, pink noise, represents severe program with heavy clipping. Maximum- continuous sine wave at 1% clipping. AC Inlet: IEC 6032 C13 IEC 6023 C19 Supplied Cord Set 120V: 8ft (2.5m), NEMA 5-15 plug 120V: 8ft(2.5m), NEMA 5-20 plug 230V: 8ft(2.5m), CEE7/7 plug 230V: 8ft(2.5m), CEE7/7 plug Weight 68 lb. (30.8 kg) net, 77 lb. (34.9 kg) shipping 75 lb. (33.1 kg) net, 87 lb. (37.2 kg) shipping Dimensions 19.0” wide x 5.2” (3RU) high x 15.9” deep (482x132x404mm)