Back to the main page Back to category Speakers and Monitors
musical instrument details
ADAM A8X Active Studio Monitoring Bundle (NEW)
Estimated price for orientation: 1 239 $
Category: Speakers and Monitors
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Sub-Type: Active Type: Studio Monitors RMS Power: 400W MPN: Does Not Apply Bundled Items: Stand Model: A8X Features: 2-Way Configuration, Full Range Configuration Brand: ADAM Active/Passive: Active EAN: Does not apply
The ideal solution for project and professional studio monitoring, featuring ADAM’s largest speakers in the AX range, the ADAM A8X, plus a pair of Isoacoustics sound isolating desktop speaker stands that ensure you get the most out of your monitor setup.ADAM A8X Studio Monitoring Bundle Main Features X-ART ribbon tweeter technology for extended frequency response 8 Inch carbon fibre LF driver 400 watts total Includes IsoAcoustics acoustic isolating monitor stands
Package consists of: 2 x ADAM A8X active studio monitors 1 x IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair) 2 x Lynx PRL3M 3 metre balanced jack to Male XLR cable
ADAM A8X active studio monitorsWith its power and radiation characteristics, the brand new ADAM A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.The ADAM A8X is equipped with the X-ART tweeter and a large (8.5 inch) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the ADAM A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the ADAM A8X has power in abundance and is the brawny monitor of the AX-Series.On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the ADAM A8X to be used in almost any application.ADAM A8X Specifications Woofer Amp. power RMS / music: 150 W / 225 W Tweeter Amp. power RMS / music: 50 W / 75 W Input connectors: XLR / RCA Frequency response: 38 Hz - 50 kHz Weight: 28.7 lb (13 kg) Dimensions: 15.5 x 10 x 12.5 inches / 400 x 255 x 320 mm
IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair)IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.Placement – proximity to adjacent and nearby surfaces. ISO-L8R200 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.Height Adjustment
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R200 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.Numerous combinations of height and tilt adjustment allow ideal listening position.IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 7.8 x 10 inches . Listing correct at time of upload errors and omissions excepted.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Sub-Type: | Active |
| Type: | Studio Monitors | RMS Power: | 400W |
| MPN: | Does Not Apply | Bundled Items: | Stand |
| Model: | A8X | Features: | 2-Way Configuration, Full Range Configuration |
| Brand: | ADAM | Active/Passive: | Active |
| EAN: | Does not apply |
The ideal solution for project and professional studio monitoring, featuring ADAM’s largest speakers in the AX range, the ADAM A8X, plus a pair of Isoacoustics sound isolating desktop speaker stands that ensure you get the most out of your monitor setup.ADAM A8X Studio Monitoring Bundle Main Features X-ART ribbon tweeter technology for extended frequency response 8 Inch carbon fibre LF driver 400 watts total Includes IsoAcoustics acoustic isolating monitor stands
Package consists of: 2 x ADAM A8X active studio monitors 1 x IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair) 2 x Lynx PRL3M 3 metre balanced jack to Male XLR cable
ADAM A8X active studio monitorsWith its power and radiation characteristics, the brand new ADAM A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.The ADAM A8X is equipped with the X-ART tweeter and a large (8.5 inch) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the ADAM A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the ADAM A8X has power in abundance and is the brawny monitor of the AX-Series.On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the ADAM A8X to be used in almost any application.ADAM A8X Specifications Woofer Amp. power RMS / music: 150 W / 225 W Tweeter Amp. power RMS / music: 50 W / 75 W Input connectors: XLR / RCA Frequency response: 38 Hz - 50 kHz Weight: 28.7 lb (13 kg) Dimensions: 15.5 x 10 x 12.5 inches / 400 x 255 x 320 mm
IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair)IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.Placement – proximity to adjacent and nearby surfaces. ISO-L8R200 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.Height Adjustment
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R200 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.Numerous combinations of height and tilt adjustment allow ideal listening position.IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 7.8 x 10 inches . Listing correct at time of upload errors and omissions excepted.
Package consists of: 2 x ADAM A8X active studio monitors 1 x IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair) 2 x Lynx PRL3M 3 metre balanced jack to Male XLR cable
ADAM A8X active studio monitorsWith its power and radiation characteristics, the brand new ADAM A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.The ADAM A8X is equipped with the X-ART tweeter and a large (8.5 inch) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the ADAM A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the ADAM A8X has power in abundance and is the brawny monitor of the AX-Series.On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the ADAM A8X to be used in almost any application.ADAM A8X Specifications Woofer Amp. power RMS / music: 150 W / 225 W Tweeter Amp. power RMS / music: 50 W / 75 W Input connectors: XLR / RCA Frequency response: 38 Hz - 50 kHz Weight: 28.7 lb (13 kg) Dimensions: 15.5 x 10 x 12.5 inches / 400 x 255 x 320 mm
IsoAcoustics ISO-L8R200 Desktop Monitor Stands (Pair)IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.Placement – proximity to adjacent and nearby surfaces. ISO-L8R200 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.Height Adjustment
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R200 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.Numerous combinations of height and tilt adjustment allow ideal listening position.IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 7.8 x 10 inches . Listing correct at time of upload errors and omissions excepted.