Back to the main page Back to category Marshall JVM410H 100 watt Guitar
musical instrument details
Marshall JVM410H 100 watt Guitar Amp Head, 4 channels, 12 modes, w/reverb & case
Estimated price for orientation: 1 000 $
Category: Marshall JVM410H 100 watt Guitar
Class:
Description Brand: Marshall Model: JVM410H Amplifier Type: Head Amplifier Technology: Vacuum Tube Number of Channels: 4 Suitable For: Performance
Hi!, you are bidding on a Marshall JVM410H 100 watt Guitar Amp Head, 4 channels, 12 modes, w/digital reverb, including a Marshall rolling amp head case. The amp head is very clean, no big scratches or marks. It was re-tubed about one year ago and biased by Third Coast Repair, an authorized service center. The amp roars, with 3 different modes for each of the 4 channels. You can also program the included footswitch to control reverb, solo mode or effects loop. The amp can also be controlled by a midi controller if desired. The amp weighs about 50 lbs. Buyer pays for shipping. I will box nicely so no damage. I have the original manual and including a Marshall rolling case with handle. There is some wear on the bottom of the case, see pic.
GOOD LUCK! EMAIL ME ANY QUESTIONS!
JVM410H
British-built, the 100 Watt all-valve JVM410H head redefines versatility thanks to four tonally independent channels: Clean, Crunch, OD1 and OD2, each with three switchable modes. Each mode reconfigures the gain structure of each channel, making twelve modes in total.
The JVM410H front panel looks mind boggling with its twenty-eight controls and eight switches, but because it is intuitively laid out, it is remarkably simple to use. The JVM410H also features four studio-quality digital Reverbs (one per channel), individual channel EQ, two Master Volumes, and a memory that can recall your Reverb, FX loop and Master settings.
Our revolutionary Stompware foot switching technology gives you unprecedented control of your setup, with straight switching or programmable switching. The six-button footswitch (supplied) connects to the amp using a standard guitar lead, so you’re not restricted by stage size – and if your cable fails, then it’s very easy to replace.
Combining some of the finest Marshall sounds, the JVM410H has a vast tonal palette, taking you from ‘Plexi’/JTM45 cleans through JCM800 roar to modern high gain.
Electronics
WATTAGE 100W
INPUTS 1 (+MIDI)
CONTROLS VOLUME/GAIN/BASS/MIDDLE/TREBLE x 4, REVERB x 4, CHANNEL SELECT x 4, PRESENCE, RESONANCE, FX LOOP, FOOTSWITCH/PROGRAMME
Valves
PRE AMP VALVES 4 x ECC83
POWER AMP VALVES 1 x ECC83 , 4 x EL34
Accessories
FOOTSWITCH PEDL-91005 INCLUDED (6 WAY FOOTCONTROLLER)Dimensions
WEIGHT (KG) 22
DIMENSIONS in mm
(W x H x D) 740 x 310 x 215
Other
MASTER VOLUME
EFFECTS
EFFECTS LOOP
Description
| Brand: | Marshall | Model: | JVM410H |
| Amplifier Type: | Head | Amplifier Technology: | Vacuum Tube |
| Number of Channels: | 4 | Suitable For: | Performance |
Hi!, you are bidding on a Marshall JVM410H 100 watt Guitar Amp Head, 4 channels, 12 modes, w/digital reverb, including a Marshall rolling amp head case. The amp head is very clean, no big scratches or marks. It was re-tubed about one year ago and biased by Third Coast Repair, an authorized service center. The amp roars, with 3 different modes for each of the 4 channels. You can also program the included footswitch to control reverb, solo mode or effects loop. The amp can also be controlled by a midi controller if desired. The amp weighs about 50 lbs. Buyer pays for shipping. I will box nicely so no damage. I have the original manual and including a Marshall rolling case with handle. There is some wear on the bottom of the case, see pic.
GOOD LUCK! EMAIL ME ANY QUESTIONS!
JVM410H
British-built, the 100 Watt all-valve JVM410H head redefines versatility thanks to four tonally independent channels: Clean, Crunch, OD1 and OD2, each with three switchable modes. Each mode reconfigures the gain structure of each channel, making twelve modes in total.
The JVM410H front panel looks mind boggling with its twenty-eight controls and eight switches, but because it is intuitively laid out, it is remarkably simple to use. The JVM410H also features four studio-quality digital Reverbs (one per channel), individual channel EQ, two Master Volumes, and a memory that can recall your Reverb, FX loop and Master settings.
Our revolutionary Stompware foot switching technology gives you unprecedented control of your setup, with straight switching or programmable switching. The six-button footswitch (supplied) connects to the amp using a standard guitar lead, so you’re not restricted by stage size – and if your cable fails, then it’s very easy to replace.
Combining some of the finest Marshall sounds, the JVM410H has a vast tonal palette, taking you from ‘Plexi’/JTM45 cleans through JCM800 roar to modern high gain.
Electronics
WATTAGE 100W
INPUTS 1 (+MIDI)
CONTROLS VOLUME/GAIN/BASS/MIDDLE/TREBLE x 4, REVERB x 4, CHANNEL SELECT x 4, PRESENCE, RESONANCE, FX LOOP, FOOTSWITCH/PROGRAMME
Valves
PRE AMP VALVES 4 x ECC83
POWER AMP VALVES 1 x ECC83 , 4 x EL34
Accessories
FOOTSWITCH PEDL-91005 INCLUDED (6 WAY FOOTCONTROLLER)Dimensions
WEIGHT (KG) 22
DIMENSIONS in mm
(W x H x D) 740 x 310 x 215
Other
MASTER VOLUME
EFFECTS
EFFECTS LOOP
GOOD LUCK! EMAIL ME ANY QUESTIONS!
JVM410H
British-built, the 100 Watt all-valve JVM410H head redefines versatility thanks to four tonally independent channels: Clean, Crunch, OD1 and OD2, each with three switchable modes. Each mode reconfigures the gain structure of each channel, making twelve modes in total.
The JVM410H front panel looks mind boggling with its twenty-eight controls and eight switches, but because it is intuitively laid out, it is remarkably simple to use. The JVM410H also features four studio-quality digital Reverbs (one per channel), individual channel EQ, two Master Volumes, and a memory that can recall your Reverb, FX loop and Master settings.
Our revolutionary Stompware foot switching technology gives you unprecedented control of your setup, with straight switching or programmable switching. The six-button footswitch (supplied) connects to the amp using a standard guitar lead, so you’re not restricted by stage size – and if your cable fails, then it’s very easy to replace.
Combining some of the finest Marshall sounds, the JVM410H has a vast tonal palette, taking you from ‘Plexi’/JTM45 cleans through JCM800 roar to modern high gain.
Electronics
WATTAGE 100W
INPUTS 1 (+MIDI)
CONTROLS VOLUME/GAIN/BASS/MIDDLE/TREBLE x 4, REVERB x 4, CHANNEL SELECT x 4, PRESENCE, RESONANCE, FX LOOP, FOOTSWITCH/PROGRAMME
Valves
PRE AMP VALVES 4 x ECC83
POWER AMP VALVES 1 x ECC83 , 4 x EL34
Accessories
FOOTSWITCH PEDL-91005 INCLUDED (6 WAY FOOTCONTROLLER)Dimensions
WEIGHT (KG) 22
DIMENSIONS in mm
(W x H x D) 740 x 310 x 215
Other
MASTER VOLUME
EFFECTS
EFFECTS LOOP