Back to the main page Back to category Live and Studio Mixers
musical instrument details
Mixer SQN 4s - KATA Sundo1 - Zoom H4n Handy Recorder
Estimated price for orientation: 2 000 $
Category: Live and Studio Mixers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Marca: SQN Tipo: Mixer
Users with less that 10 votes or negative votes, contact me before bid. Thank youPay attention!!, this is the old version of SQN 4sThe equipment has been working correctly until I buy a new one in substitution. The zoom can be feed externally across a cable, own manufacture, that supplies 5,5v. I was using a external battery, NP, and was feeding with her the Zoom, and the mixer (Battery not included)SQN, Used, but in very good condition, almost new. Only a switcher, (T/mic) is damaged, but it does not concern the functioning of the mixer.Zoom, Used. It works correctly. It had a breakdown in the headphones connector, that was repair and now it works correctly. It is supplied with original box.Kata SUNDO 1 secondhand very good condition. Some unstitchSQN-4S_mini Miniature 4:2 ENG Audio Mixer The smallest of our broadcast quality stereo portable mixers
for TV, film and radio locations The SQN-4S_mini, an upgraded revision of the SQN-2S which created new size and weight benchmarks for the miniature ENG mixer, has placed the essence of the well known SQN-4S 4:2 mixer into a case identical in size to the earlier SQN-3M mono mixer. This tiny mixer is capable of carrying out virtually any of the tasks commonly required of a portable mixer in location recording and outside broadcast. Two of the input channels, CH1 & CH2, are conventional microphone channels with the full range of powering bass cut and attenuation. This pair can also be MS matrixed.
The second pair, CH3 & CH4, have a reduced gain and no powering. They are intended for use with Radio Mics or other self-powered mics. All channels can be routed Left, Right or Centre (both). The mixer includes balanced transformerless input and output amplifiers, virtually unbreakable analogue level meters, pre-fade listening (on CH4), slating microphone, a minimal length audio path with the option of MS matrixing of CH1 & CH2. The limiter is identical to the design already proven in the SQN-4S as is the low distortion tone oscillator. MS decoding of the monitoring is also provided. The essential information for connecting to and operating the mixer is permanently printed on the baseplate. Dimensions The dimensions of the mixer case are: Height 44mm, Width 210mm, Depth 120mm Weight The weight of the mixer without batteries is 1.1kg Construction The outer case of the mixer is made of aluminium. The Connector and Routing End Blocks are milled from solid aluminium bar, as is the Battery Compartment Door. The circuitry is constructed on multi-layer printed circuit boards with internal ground and power planes which ensure the integrity of the internal grounding system. All control knobs are special to SQN and are turned and milled from solid aluminium bar. The internal battery compartment is milled and bored from a solid block of polyacetal engineering plastics material and the moving parts are aluminium and stainless steel. All labels and legends on the mixer are permanent. On the end blocks they are engraved; on the front panel they are printed into the hard-anodised surface; on the baseplate they are reverse printed on a polycarbonate label. The mechanical construction is a development of a system which has proven in the past to be resistant to mechanical damage.
The SQN-4S_mini mixer offers the professional recordist: · Unsurpassed sound quality · Industry standard acceptability · User friendly ergonomic layout · Tried and tested electronic design · Superior mechanical engineerig · lowest running costs · Highest resale value · Long trouble-free service · The utmost in portability · Efficient factory back-up service
Zoom H4N Handy Portable Digital Recorder · Onboard X/Y Mics: High quality with easy to set selectable recording width (90 and 120 degrees) · 2 XLR/TRS Inputs: Connect mics, instruments, and line level devices for added possibilities · 24-bit/96kHz Recording: High resolution audio · Expanded Capabilities: Built-in effects, audio interface mode, and onboard speaker make it the recorder of choice · Included Accessories - old version: 2G SD card, power adaptor, microphone adaptor clip, foam windscreen, plastic case, USB cable, 2x AA batteries, Cubase LE, manual. Kata SUNDO-1 Audio Organizer Kata SUNDO-1 (SUNDO1) Audio Organizer for Shure FP31, 32, 32A, 33, Sound Devices 442 or other 3 channel mixers (internal dimensions: H 20cm x L 35cm x W 18cm) (p/n KT VD-130-1)
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Marca: | SQN |
| Tipo: | Mixer |
Users with less that 10 votes or negative votes, contact me before bid. Thank youPay attention!!, this is the old version of SQN 4sThe equipment has been working correctly until I buy a new one in substitution. The zoom can be feed externally across a cable, own manufacture, that supplies 5,5v. I was using a external battery, NP, and was feeding with her the Zoom, and the mixer (Battery not included)SQN, Used, but in very good condition, almost new. Only a switcher, (T/mic) is damaged, but it does not concern the functioning of the mixer.Zoom, Used. It works correctly. It had a breakdown in the headphones connector, that was repair and now it works correctly. It is supplied with original box.Kata SUNDO 1 secondhand very good condition. Some unstitchSQN-4S_mini Miniature 4:2 ENG Audio Mixer The smallest of our broadcast quality stereo portable mixers
for TV, film and radio locations The SQN-4S_mini, an upgraded revision of the SQN-2S which created new size and weight benchmarks for the miniature ENG mixer, has placed the essence of the well known SQN-4S 4:2 mixer into a case identical in size to the earlier SQN-3M mono mixer. This tiny mixer is capable of carrying out virtually any of the tasks commonly required of a portable mixer in location recording and outside broadcast. Two of the input channels, CH1 & CH2, are conventional microphone channels with the full range of powering bass cut and attenuation. This pair can also be MS matrixed.
The second pair, CH3 & CH4, have a reduced gain and no powering. They are intended for use with Radio Mics or other self-powered mics. All channels can be routed Left, Right or Centre (both). The mixer includes balanced transformerless input and output amplifiers, virtually unbreakable analogue level meters, pre-fade listening (on CH4), slating microphone, a minimal length audio path with the option of MS matrixing of CH1 & CH2. The limiter is identical to the design already proven in the SQN-4S as is the low distortion tone oscillator. MS decoding of the monitoring is also provided. The essential information for connecting to and operating the mixer is permanently printed on the baseplate.
The SQN-4S_mini mixer offers the professional recordist:
Zoom H4N Handy Portable Digital Recorder · Onboard X/Y Mics: High quality with easy to set selectable recording width (90 and 120 degrees) · 2 XLR/TRS Inputs: Connect mics, instruments, and line level devices for added possibilities · 24-bit/96kHz Recording: High resolution audio · Expanded Capabilities: Built-in effects, audio interface mode, and onboard speaker make it the recorder of choice · Included Accessories - old version: 2G SD card, power adaptor, microphone adaptor clip, foam windscreen, plastic case, USB cable, 2x AA batteries, Cubase LE, manual. Kata SUNDO-1 Audio Organizer Kata SUNDO-1 (SUNDO1) Audio Organizer for Shure FP31, 32, 32A, 33, Sound Devices 442 or other 3 channel mixers (internal dimensions: H 20cm x L 35cm x W 18cm) (p/n KT VD-130-1)
for TV, film and radio locations The SQN-4S_mini, an upgraded revision of the SQN-2S which created new size and weight benchmarks for the miniature ENG mixer, has placed the essence of the well known SQN-4S 4:2 mixer into a case identical in size to the earlier SQN-3M mono mixer. This tiny mixer is capable of carrying out virtually any of the tasks commonly required of a portable mixer in location recording and outside broadcast. Two of the input channels, CH1 & CH2, are conventional microphone channels with the full range of powering bass cut and attenuation. This pair can also be MS matrixed.
The second pair, CH3 & CH4, have a reduced gain and no powering. They are intended for use with Radio Mics or other self-powered mics. All channels can be routed Left, Right or Centre (both). The mixer includes balanced transformerless input and output amplifiers, virtually unbreakable analogue level meters, pre-fade listening (on CH4), slating microphone, a minimal length audio path with the option of MS matrixing of CH1 & CH2. The limiter is identical to the design already proven in the SQN-4S as is the low distortion tone oscillator. MS decoding of the monitoring is also provided. The essential information for connecting to and operating the mixer is permanently printed on the baseplate.
| Dimensions |
| The dimensions of the mixer case are: Height 44mm, Width 210mm, Depth 120mm |
| Weight |
| The weight of the mixer without batteries is 1.1kg |
| Construction |
| The outer case of the mixer is made of aluminium. The Connector and Routing End Blocks are milled from solid aluminium bar, as is the Battery Compartment Door. The circuitry is constructed on multi-layer printed circuit boards with internal ground and power planes which ensure the integrity of the internal grounding system. All control knobs are special to SQN and are turned and milled from solid aluminium bar. The internal battery compartment is milled and bored from a solid block of polyacetal engineering plastics material and the moving parts are aluminium and stainless steel. All labels and legends on the mixer are permanent. On the end blocks they are engraved; on the front panel they are printed into the hard-anodised surface; on the baseplate they are reverse printed on a polycarbonate label. The mechanical construction is a development of a system which has proven in the past to be resistant to mechanical damage. |
| · Unsurpassed sound quality · Industry standard acceptability · User friendly ergonomic layout · Tried and tested electronic design · Superior mechanical engineerig | · lowest running costs · Highest resale value · Long trouble-free service · The utmost in portability · Efficient factory back-up service |