Description
Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Audio Technica |
MPN: | AT4050ST | Model: | AT4050ST |
UPC: | Does Not Apply |
Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcementIndependent cardioid and figure-of-eight condenser elementsSwitch selection of Mid-Side mode and two internally matrixed stereo modesDual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphoneTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsThe 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of useOpen acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsIntegral 80 Hz high-pass filter switch and 10 dB pad switchState-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standardsCustom shock mount provides superior isolationCertified by the METAlliance (Music Engineering and Technology Alliance) | ELEMENT: Externally-polarized (DC bias) condenserPOLAR PATTERN: Cardioid and Figure-of-eightFREQUENCY RESPONSE: 20-18,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave: OPEN CIRCUIT SENSITIVITYStereo 90°: -42 dB (7.9 mV) dB re 1V at 1 PaStereo 127°: -41 dB (8.9 mV) dB re 1V at 1 PaMid: -36 dB (15.8 mV) dB re 1V at 1 PaSide: -36 dB (15.8 mV) dB re 1V at 1 PaIMPEDANCE: 50 ohms: MAXIMUM INPUT SOUND LEVELMid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal): NOISEStereo 90°: 25 dB SPL: Stereo127°: 16 dB SPLMid: 15 dB SPLSide: 17 dB SPL: DYNAMIC RANGE (TYPICAL)Mid: 134 dB, 1 kHz at Max SPLSide: 132 dB, 1 kHz at Max SPL: SIGNAL-TO-NOISE RATIOStereo 90°: 69 dB, 1 kHz at 1 PaStereo 127°: 78 dB, 1 kHz at 1 PaMid: 79 dB, 1 kHz at 1 PaSide: 77 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 48V DC, 6.4 mA typical (both channels total)SWITCHES: 90°, 127°, M-S; Flat, roll-off; 10 dB pad (nominal)WEIGHT: 517 g (18.2 oz)DIMENSIONS: 193.0 mm (7.60") long,: 53.4 mm (2.10") maximum body diameterOUTPUT CONNECTOR: Integral 5-pin XLRM-typeCABLE: 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output endACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying caseAUDIO-TECHNICA CASE STYLE: R1 |