The MXWANI4 enables easy out-of-the-box system setup with no additional networking hardware required. With per-channel analog outputs, it is the central point for connecting and distributing Microflex Wireless systems and the Microflex Advance MXA310 Table Array to conference room AV networks.Premium Conferencing Audio for Elite BoardroomsVivid, lifelike sound: Microflex microphone elements flawlessly capture full-range audio for clear, detailed communicationVersatile microphone selection: Wireless boundary, gooseneck, bodypack, and handheld models are available to fit any conferencing applicationDiscreet designs: With elegant aesthetics and a low-profile footprint, Microflex Wireless systems are designed to install easily and disappear into AV environmentsScalable solutions: 4- and 8-channel systems can be combined to support configurations of up to 40 compatible channels (80 in Europe and select countries). Adjustable power limits enable additional channels to operate in separate rooms. Subnet scalability/size: Up to 20 APT4 or APT8 devices per subnetNetworked Digital Wireless for Enterprise-Scale EnvironmentsDante digital audio networking: Integrated solution transports low-latency, uncompressed audio over standard Ethernet networksEthernet connectivity: All Microflex Wireless networking components connect via Cat5e cable for simplified installationCorporate network ready: Connect to corporate networks and third-party control systems using standard networking protocols for remote management and campus-wide implementationMicroflex Wireless Control Software: Browser-based control software offers comprehensive remote monitoring and control of all settings and status parameters over the web, a corporate network or an AV local area network. Access the software via the Shure Web Device Discovery ApplicationControl system compatible: Third-party control and automation systems (AMX®, Crestron®) are fully compatible with Microflex Wireless, enabling the creation of custom interfaces on touchscreen panelsIntelligent Performance, Simplified Setup & OperationAdvanced rechargeable power management: Smart lithium-ion rechargeable batteries deliver up to 8 hours of continuous use, enable remote status monitoring while in the charger and provide remaining runtime in hours and minutes while in use via networked control systemsAutomated frequency coordination: Microflex Wireless systems actively scan the available spectrum and coordinate clean, compatible frequencies for every microphone channel. While in use, systems automatically move away from unexpected interferenceEncrypted wireless: Audio transmission is protected by AES-256 encryption, the same secure standard used in top government applicationsSelectable transmit power: Select the appropriate wireless output power per room to optimize spectrum usage, range and battery lifeA Trusted Shure ExperienceWireless expertise: Microflex Wireless embodies the robust performance and reliability of other globally renowned Shure wireless systemsTrusted audio: Microflex Wireless transmitters use the same signature microphone elements as Microflex wired microphones seen in conferencing applications worldwideCommShield® Technology: All Microflex microphones feature this patented technology, which guards against unwanted radio interference from consumer wireless devicesMXWANI4 connects and distributes Microflex® Wireless and Microflex® Advance™ to conference room AV networks.FeaturesFour-port gigabit switch: Optimized port configurations for connection to the access point transceiver and networked charging stations, third-party control systems, and corporate networksEthernet connectivity: Send audio and control signals over long cable runs of up to 300 feet or anywhere over a corporate networkPower over Ethernet: Port 1 of the rear panel switch supplies power over Ethernet to the access point transceiver (APT) or MXA310 for simplified installationCorporate uplink mode: Link to the corporate network for remote control of system settings while keeping audio off the network for security and to reduce bandwidthFront panel controls: Mute or solo channels and set input / output levels easily from the front panelPC / Mac software control: Access the Microflex Wireless Control Software from a networked computer for input / output levels and port configurationDante™ networking: Transports low-latency digital audio received from wireless microphones over Ethernet to any other Dante-equipped deviceHeadphone output: Solo audio signal on any channelSpecificationsAudio Frequency Response: 20 Hz to 20 kHz (+1, −1.5 dB)Dynamic Range (20 Hz to 20 kHz, A-weighted, typical): Analog-to-Dante: 113 dB Dante-to-Analog: 110 dBOutput Noise (20 Hz to 20 kHz, A-Weighted, typical): Line: −84.5 dBV Aux: −95.2 dBV Mic: −106.5 dBVTHD+N (20 Hz to 20 kHz@ +4dBu analog input, −10 dBFS digital input): Polarity: Non-inverting, any input to any outputDimensions: 44 mm x 483 mm x 366 mm (1.7 in. x 19.0 in. x 14.4 in.), H x W x DWeight: MXWANI4 3.1 kg (6.9 lbs)Housing: Steel; Extruded aluminumPower Requirements: 100 to 240 V AC, 50–60 Hz, 1 AOperating Temperature Range: −18°C (0°F) to 63°C (145°F)Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)Analog Connections - OutputsConfiguration: Active BalancedImpedance: 310 ΩClipping Level (minimum): Line: +26.2 dBV Aux: +16.2 dBV Mic: −3.8 dBVAnalog Connections - Input(s)Configuration: Active BalancedImpedance: 10.6 kΩClipping Level (minimum): Line: +23.8 dBV Aux: +10.8 dBVHeadphone Output: 6.35 mm (1/4") TRS, 100 mW, 350 Ω, dual mono (will drive stereo phones)Digital Signal Processing: 0 dBV=1 V RMS 0 dBu=0.775 V RMS 0 dBV=2.2 dBuAD/DA Converter 24-bit, 48 kHzLatency (Estimated Nominal, ±0.1 ms): Analog-to-Dante: 0.21 ms Dante-to-Analog: 0.24 ms + TN TN = Network latency in milliseconds, as set in Dante Controller. Note: Dante network latency is typically associated with the receiving device.NetworkingNetwork Interface: Four-Port Gigabit Ethernet Switch, Dante digital audioUplink Port (Port 4): Selectable, blocks multicast trafficPower over Ethernet (PoE): Provided on Port 1 to power MXWAPTCable Requirements: Cat 5e or higher, shielded, 100 m maximum between network devicesNetwork Addressing Capability: DHCP, link-local, static