Back to the main page Back to category Speakers and Monitors
musical instrument details
2 - EAW MK5396i 15" Mains Pair (two)
Estimated price for orientation: 1 250 $
Category: Speakers and Monitors
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: EAW Features: 2-Way Configuration
This is for a Pair (two loudspeakers)
These sound amazing! MK-5396i A 2-way passive full range system in a compact vented rectangular enclosure. Includes 1x 15-in woofer and a 3-in exit compression driver on a 90 x 60 constant directivity horn. APPLICATIONS The MK5396i provides very high output and wide band response in distributed applications. Used in a Church. A little dirty from being hung high in the ceiling. All work Great! CONFIGURATION Subsystem: Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver Loading: LF – Vented; HF – Horn-loadedOperating Mode: Amplifier Channels: Single-amp LF/HF External Signal Processing: High pass filter; DSP w/2-way filters PERFORMANCE Operating Range (-10 dB, Hz) 48Hz – 19KHzAxial Sensitivity (1W @ 1m, dB SPL) LF: 98 HF: 105 Full Range: 98Power Handling/Impedance (Watts @ Ohms) LF: 800 @ 8 HF: 150 @ 8 Full Range: 800 @ 8Calculated Maximum Output Peak (dB SPL) LF: 133 HF: 133 Full Range: 133Calculated Maximum Output Long Term (dB SPL) LF: 127 HF: 127 Full Range: 127Nominal Coverage (degrees) Horizontal: 90 Vertical: 60Powering Switchable: bi-amplified or passive The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes. To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price. Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers. The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | EAW |
| Features: | 2-Way Configuration |
This is for a Pair (two loudspeakers)
These sound amazing! MK-5396i A 2-way passive full range system in a compact vented rectangular enclosure. Includes 1x 15-in woofer and a 3-in exit compression driver on a 90 x 60 constant directivity horn. APPLICATIONS The MK5396i provides very high output and wide band response in distributed applications. Used in a Church. A little dirty from being hung high in the ceiling. All work Great! CONFIGURATION Subsystem: Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver Loading: LF – Vented; HF – Horn-loadedOperating Mode: Amplifier Channels: Single-amp LF/HF External Signal Processing: High pass filter; DSP w/2-way filters PERFORMANCE Operating Range (-10 dB, Hz) 48Hz – 19KHzAxial Sensitivity (1W @ 1m, dB SPL) LF: 98 HF: 105 Full Range: 98Power Handling/Impedance (Watts @ Ohms) LF: 800 @ 8 HF: 150 @ 8 Full Range: 800 @ 8Calculated Maximum Output Peak (dB SPL) LF: 133 HF: 133 Full Range: 133Calculated Maximum Output Long Term (dB SPL) LF: 127 HF: 127 Full Range: 127Nominal Coverage (degrees) Horizontal: 90 Vertical: 60Powering Switchable: bi-amplified or passive The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes. To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price. Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers. The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.
These sound amazing! MK-5396i A 2-way passive full range system in a compact vented rectangular enclosure. Includes 1x 15-in woofer and a 3-in exit compression driver on a 90 x 60 constant directivity horn. APPLICATIONS The MK5396i provides very high output and wide band response in distributed applications. Used in a Church. A little dirty from being hung high in the ceiling. All work Great! CONFIGURATION Subsystem: Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver Loading: LF – Vented; HF – Horn-loadedOperating Mode: Amplifier Channels: Single-amp LF/HF External Signal Processing: High pass filter; DSP w/2-way filters PERFORMANCE Operating Range (-10 dB, Hz) 48Hz – 19KHzAxial Sensitivity (1W @ 1m, dB SPL) LF: 98 HF: 105 Full Range: 98Power Handling/Impedance (Watts @ Ohms) LF: 800 @ 8 HF: 150 @ 8 Full Range: 800 @ 8Calculated Maximum Output Peak (dB SPL) LF: 133 HF: 133 Full Range: 133Calculated Maximum Output Long Term (dB SPL) LF: 127 HF: 127 Full Range: 127Nominal Coverage (degrees) Horizontal: 90 Vertical: 60Powering Switchable: bi-amplified or passive The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes. To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price. Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers. The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.