Full Band Self Contained Wireless In Ear Monitor Rack 5 SHURE PSM 600, 01v96 CONSOLE AND ROAD CASE  This is an "all-in-one" in ear monitor rig. Capable of 5 wireless PSM 600 in ear mixes, one hard wired ear mix plus capability to MIX FOH WITH Left, Right , and sub sends, digital Yamaha 01v96 console and 3 way passive splitter, in a road ready compact road case. Full blown monitor rig to make your band self contained and each musician gets to hear what they want to hear on stage, thanks to individual mixes! INCLUDED: YAMAHA 01v96 CONSOLEYAMAHA MG102c CONSOLEIN EAR MONITORS - FIVE (5) SHURE PSM 600 TRANSMITTERS AND FIVE (5) BODY PACK RECEIVERS ONE (1) SHURE HARD WIRED IEM PACK TWO (2) SHURE PADDLE ANTENNAS TWO (2) 50 ohm BNC LINES BEHRINGER OUT BOARD EFFECTS PROCESSORFURMAN 20 AMP PRO SERIES POWER CONDITIONERTWO (2) MID ATLANTIC FOUR RACK SPACE DRAWERS 3 WAY 24 CHANNEL PASSIVE SPLITTERTWO (2) CASES OF HARD-WIRED IEM ADAPTOR CABLESWE ARE ALSO INCLUDING: ONE PAIR OF SHURE SE115 EAR BUDS, ONE PAIR OF SHURE SE425 EAR BUDS and FOUR SPARE BACK UP PAIRS OF EAR BUDS (in case the drummer leaves his ears at home). There is also a bag of new ear fittings.Now for the details:01v96 CONSOLE- You simply won't find another digital console this compact and affordable that offers this much performance and flexibility. The 01V96 fits comfortably in the small-studio space - and budget while delivering sound, capacity, control, and compatibility on a par with much larger consoles.24-bit/96-kHz Performance Takes Digital Sound To the Next Level. The entire industry is now settling on 24-bit/96-kHz digital operation for significantly superior sonic quality. The 01V96 gives you a choice - you can work at 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz, depending on the needs of each individual project. But when you want the truly transparent, incredibly dynamic sound of 24-bits at 96 kHz, the 01V96 is ready to deliver. It even includes a comprehensive range of superb 96-kHz compatible stereo effects with 32-bit internal processing.16 analog channel inputs - 12 with high-performance microphone head amplifiers - and eight digital channel inputs via a built-in ADAT optical interface. The first 12 analog channels will accept microphone signals or balanced/unbalanced line-level signals, while the remaining four channels can be used either as individual balanced/unbalanced line inputs or two stereo pairs. 20-bus Configuration The 01V96 offers a main stereo program bus, eight individual mixing buses, two solo buses, and eight auxiliary buses - a total of 20 in all. This gives you plenty of signal-routing options to adapt to just about any mixing requirements.Built-in ADAT Optical Interface The 01V96 comes with an industry-standard ADAT optical digital I/O interface built right in. Additional optical I/O capacity can be added via the 01V96 expansion slot, as necessary.Fast, Flexible Digital Patching All available inputs, outputs, effects, and channel inserts can be assigned to any of the console's channels or outputs via the 01V96's remarkably versatile, easy-to-use digital patching system. 99-Scene Memory Complete console setups can be memorized and instantly recalled via the 01V96 SCENE MEMORY controls. Memory is provided for up to 99 scenes. In addition to recalling scenes from the panel controls you can recall them remotely via MIDI program change messages, providing a handy degree of automation capability.All input channels on the 01V96 feature flexible, independent compression and gating/ducking processors for dynamics control. All bands on the 4-band parametric channel equalizers are fully sweepable from 20 Hz to 20 kHz, with bandwidth variable from 0.1 to 10 and a +/-18dB gain range for extraordinary equalization flexibility. The channel delays also go well beyond the norm, with a maximum delay of 452 milliseconds (96 kHz mode). Even the stereo bus, eight mix buses, and eight aux buses have individual compression and EQ!Expandable Data Libraries, Studio Manager Software SuppliedLarge LCD Panel-The new 01V96 display is a high-resolution 320 x 240 dot LCD panel that provides easy visual access to all of the consoles functions and parameters. Many parameters are displayed graphically so you can see what's happening at a glance - EQ curves and compression parameters are especially "readable" in this format.This desk is equipped with a MY4DA output expansion card, that provides 4 additional analog outputs.YAMAHA MG102c CONSOLE- This small analog desk is mounted on a drawer under the 01v (MAIN CONSOLE), and is used as a mix down console to mix down the toms to one channel to save space on the 01v. This Yamaha MG Series C model is a compact analog mixer with a single-knob channel compressor and 3-band equalizer. The MG102C features 4 mic inputs, 4 stereo line inputs, 3-band sweep and fixed 3-band equalizers, 1 busses, 1 send, and 1 stereo aux return. IN EAR MONITORS- There are 5 mono mixes of Shure PSM 600 (transmitters and body pack receivers), with an antenna combiner. The mixes can easily be converted to stereo with some simple re-patching. This rack also comes with Shure paddle antennae and 2 50 ohm BNC lines, as well as one Shure hard wired iem pack, one pair of Shure SE115 ear buds and one pair of Shure SE425 ear buds, as well 4 cheap spare back up pairs of ear buds, in case the drummer leaves his ears at home. There is also a bag of new ear fittings. On the back panel of the rack, there are outputs for each wireless mix in case you can't get clean RF (RADIO FREQUENCY), you can run hard lines to your in ear monitors. There are 2 cases of hard wired iem adaptor cables included.BEHRINGER OUT BOARD EFFECTS PROCESSOR- This rack also contains a Behringer Virtualizer Pro digital effects processor for any other effects other than what is offered in the 01v96. POWER CONDITIONER-The whole rack is powered by a Furman 20 amp pro series power conditioner. 2 Mid Atlantic 4 rack space drawers are also included with this rack. (NORMALLY AROUND $150 EACH)3 WAY 24 CHANNEL PASSIVE SPLITTER- The pictures of the back panel tell it all. 24 inputs, split one is hardwired directly to the 01v96, split two and three are out put panels under the input panel. The third output panel is not wired to anything, I never got around to wiring it. The entire splitter is made with Canari Quad Star XLR cable. SHIPPING- This rack will ship freight on a pallet. If you don't have a loading dock, we will ship to a terminal near your zip code for you to pick up. We also offer local pickup (Kansas/Missouri/Kansas City Areas).If you have any questions, send a message and we will get back to you asap. Thanks for looking, cheers!