Back to the main page Back to category 36 X 10w RGBW LED Zoom Moving He
musical instrument details
36 x 10W RGBW LED Zoom Moving Head Light 360W Wash DMX 16CH Party Show DJ 4PCS
Estimated price for orientation: 1 099 $
Category: 36 X 10w RGBW LED Zoom Moving He
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Unbranded Dmx Control: Yes MPN: Does Not Apply UPC: 6903641452457
Installed with 36X10W high power RGBW 4 IN 1 LEDs 50,000 hours lifespan and low power consumption16 bit smooth and precise resolution for PAN/TILT movement540°/630° pan and 280° tilt movementScan position memory, auto reposition after unexpected movementRGBW color mixing systemZOOM:15 --60 LED dimming: DIM4 technology(adopt 4096 linearity dimmer)LED rainbow effectMacros effectStrobe effect with 20 flashes per second and pulse effect General dimming and blackout for all four colors16 DMX channelsDMX512, master-slave and sound activated controllable or auto Blue background LCD display Input Voltage: AC90-240V. 50-60HzMaintenance and CleaningThe following points have to be considered during the inspection:1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).3）Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.4）The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights.1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust.2) Clean the fan each week.3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating. We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents.There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.Should you need any spare parts, please orde
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Unbranded |
| Dmx Control: | Yes | MPN: | Does Not Apply |
| UPC: | 6903641452457 |
Installed with 36X10W high power RGBW 4 IN 1 LEDs 50,000 hours lifespan and low power consumption16 bit smooth and precise resolution for PAN/TILT movement540°/630° pan and 280° tilt movementScan position memory, auto reposition after unexpected movementRGBW color mixing systemZOOM:15 --60 LED dimming: DIM4 technology(adopt 4096 linearity dimmer)LED rainbow effectMacros effectStrobe effect with 20 flashes per second and pulse effect General dimming and blackout for all four colors16 DMX channelsDMX512, master-slave and sound activated controllable or auto Blue background LCD display Input Voltage: AC90-240V. 50-60HzMaintenance and CleaningThe following points have to be considered during the inspection:1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).3）Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.4）The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights.1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust.2) Clean the fan each week.3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating. We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents.There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.Should you need any spare parts, please orde