Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Universal Audio 1176 Model 2 dual limiting Amplifier
Estimated price for orientation: 1 750 $
Category: Preamps and Channel Strips
Class:
Description Brand: Universal Audio Rack Mountable: Yes Model: 2-1176
Universal Audio 1176 Model 2 dual limiting Amplifier. Original box and operating instructions. A1 condition, Minimal use RRP £2250
Twin Vintage Limiting Amplifier with Stereo or Dual Mono
The 1176LN was the compressor that shaped the sound of rock guitar and drums in the '70s and continues to do so to this day. Go to any world-class studio”if you don't see an 1176 or two in the rack, it's because they haven't finished building the studio. And now, thanks to the 2-1176, you can have two of this studio-proven workhorse in one unit. Now you can have the big New York studio drum sound that only comes from strapping an 1176 across your stereo buss. The 2-1176 builds from the circuit design of UA's hugely successful 6176 Channel Strip and combines two 1176 channels from that unit-- an uncompromising design, with all the same components- stereo matched to boot!The 2-1176 once again puts that sound into your rack but with twice the tone, twice the character and twice the compression-- at an unbelievable price, and half the space. As you would expect from UA, it also retains all the features and trademark sound of its ancestor, and switches easily between dual mono and stereo link. And yes, it does all-button FEATURES Sound and Features of the Original 1176LNClassic Custom 1176LN Output TransformersStereo or Dual Mono OperationTotally Independent Compression and Gain Controls in Dual Mono ModeMatched FETs and Output Transformers SPECIFICATIONS 2-1176 Twin Vintage Limiting Amplifier Input Impedance: Selectable, 15k W or 600 W
Output Load Impedance: 600 ohms, floating
External Connections: XLR connectors
Frequency Response: ± 1 dB 20 Hz to 20kHz
Gain: 40 dB, +/- 1dB
Distortion: Less than 0.5% T.H.D. from 50 Hz to 15kHz with limiting, at 1.1 seconds release setting. Output of +20 dBm with no greater than 0.5% T.H.D.
Signal to Noise Ratio: Greater than 85 dB
Attack Time: 20 microseconds to 800 microseconds
Release Time: 50 milliseconds to 1.1 secondsThreshold vs Output Level
Compression Ratio/Input Level at ±2 dB/Relative Output
20:1/-25 dBm/+13 dBm
12:1/-26 dBm/+12 dBm
8:1/-27 dBm/+11 dBm
4:1/-32 dBm/+6 dBmStereo Interconnection: Chan. A Attack and Release links to Chan. B via LINK mode
Meter: dB gain reduction and dB output
Power Requirements: 120/240 V
Dimensions: 19" Rackmount chassis, 2U
Weight: 9.6 lbs.
Description
| Brand: | Universal Audio | Rack Mountable: | Yes |
| Model: | 2-1176 |
Universal Audio 1176 Model 2 dual limiting Amplifier. Original box and operating instructions. A1 condition, Minimal use RRP £2250
Twin Vintage Limiting Amplifier with Stereo or Dual Mono
The 1176LN was the compressor that shaped the sound of rock guitar and drums in the '70s and continues to do so to this day. Go to any world-class studio”if you don't see an 1176 or two in the rack, it's because they haven't finished building the studio. And now, thanks to the 2-1176, you can have two of this studio-proven workhorse in one unit. Now you can have the big New York studio drum sound that only comes from strapping an 1176 across your stereo buss. The 2-1176 builds from the circuit design of UA's hugely successful 6176 Channel Strip and combines two 1176 channels from that unit-- an uncompromising design, with all the same components- stereo matched to boot!The 2-1176 once again puts that sound into your rack but with twice the tone, twice the character and twice the compression-- at an unbelievable price, and half the space. As you would expect from UA, it also retains all the features and trademark sound of its ancestor, and switches easily between dual mono and stereo link. And yes, it does all-button
Twin Vintage Limiting Amplifier with Stereo or Dual Mono
The 1176LN was the compressor that shaped the sound of rock guitar and drums in the '70s and continues to do so to this day. Go to any world-class studio”if you don't see an 1176 or two in the rack, it's because they haven't finished building the studio. And now, thanks to the 2-1176, you can have two of this studio-proven workhorse in one unit. Now you can have the big New York studio drum sound that only comes from strapping an 1176 across your stereo buss. The 2-1176 builds from the circuit design of UA's hugely successful 6176 Channel Strip and combines two 1176 channels from that unit-- an uncompromising design, with all the same components- stereo matched to boot!The 2-1176 once again puts that sound into your rack but with twice the tone, twice the character and twice the compression-- at an unbelievable price, and half the space. As you would expect from UA, it also retains all the features and trademark sound of its ancestor, and switches easily between dual mono and stereo link. And yes, it does all-button
FEATURES Sound and Features of the Original 1176LNClassic Custom 1176LN Output TransformersStereo or Dual Mono OperationTotally Independent Compression and Gain Controls in Dual Mono ModeMatched FETs and Output Transformers
SPECIFICATIONS 2-1176 Twin Vintage Limiting Amplifier
Input Impedance: Selectable, 15k W or 600 W
Output Load Impedance: 600 ohms, floating
External Connections: XLR connectors
Frequency Response: ± 1 dB 20 Hz to 20kHz
Gain: 40 dB, +/- 1dB
Distortion: Less than 0.5% T.H.D. from 50 Hz to 15kHz with limiting, at 1.1 seconds release setting. Output of +20 dBm with no greater than 0.5% T.H.D.
Signal to Noise Ratio: Greater than 85 dB
Attack Time: 20 microseconds to 800 microseconds
Release Time: 50 milliseconds to 1.1 secondsThreshold vs Output Level
Compression Ratio/Input Level at ±2 dB/Relative Output
20:1/-25 dBm/+13 dBm
12:1/-26 dBm/+12 dBm
8:1/-27 dBm/+11 dBm
4:1/-32 dBm/+6 dBmStereo Interconnection: Chan. A Attack and Release links to Chan. B via LINK mode
Meter: dB gain reduction and dB output
Power Requirements: 120/240 V
Dimensions: 19" Rackmount chassis, 2U
Weight: 9.6 lbs.
Output Load Impedance: 600 ohms, floating
External Connections: XLR connectors
Frequency Response: ± 1 dB 20 Hz to 20kHz
Gain: 40 dB, +/- 1dB
Distortion: Less than 0.5% T.H.D. from 50 Hz to 15kHz with limiting, at 1.1 seconds release setting. Output of +20 dBm with no greater than 0.5% T.H.D.
Signal to Noise Ratio: Greater than 85 dB
Attack Time: 20 microseconds to 800 microseconds
Release Time: 50 milliseconds to 1.1 secondsThreshold vs Output Level
Compression Ratio/Input Level at ±2 dB/Relative Output
20:1/-25 dBm/+13 dBm
12:1/-26 dBm/+12 dBm
8:1/-27 dBm/+11 dBm
4:1/-32 dBm/+6 dBmStereo Interconnection: Chan. A Attack and Release links to Chan. B via LINK mode
Meter: dB gain reduction and dB output
Power Requirements: 120/240 V
Dimensions: 19" Rackmount chassis, 2U
Weight: 9.6 lbs.