Back to the main page Back to category Other Pro Audio Equipment
musical instrument details
Aviom D800-Dante A-Net Distributor, Open-Box Special, Never Owned, Mint! #40631
Estimated price for orientation: 2 499 $
Category: Other Pro Audio Equipment
Class:
Description Brand: Aviom Country/Region of Manufacture: United States Model: D800-Dante MPN: Does Not Apply UPC: Does not apply
D800 & D800-Dante A-Net DistributorsThe D800 and D800-Dante A-Net Distributors provide the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utlitizing standard Cat-5e cables.Both units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.The D800 and D800-Dante can be used with A-16II, A320, and A360 Personal Mixers in any combination.Simple setup. Powerful performance.On the most basic level, the D800 and the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.Get more channels to your mixersUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800 and D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.Connect directly to DanteIf your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers.Dante Sample Rates Up to 192kHzWith the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).Get more channels to your mixersUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800 and D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.Connect directly to DanteIf your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers.Dante Sample Rates Up to 192kHzWith the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).Technical SpecificationsA-Net to/from Personal Mixers (front panel): Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)A-Net In or A-Net Bridge In Accepts Pro16 or Pro16e A-Net; one locking RJ45 connectorA-Net Out (rear panel) Pro16e A-Net; one locking RJ45 connector, unpoweredA-Net Mixes Out Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal MixersEthernet One RJ45 connectorLEDs Power On (red); Sync (green)USB Used for firmware updatesA-Net Cables Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connectionsOutput Voltage for Personal Mixers 24VDC, 0.5 ampTransmitted over the Cat-5e cablePower Supply Internal, universal switching type, IEC connectorInput Voltage 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4ALDimensions 19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) highWeight 12.0 lbs (5.44 kg)Dante SpecificationsDante Primary I/O Locking RJ45 connectorDante Secondary I/O Locking RJ45 connectorStereo Link Four DIP Switch blocks: 1-16, 17-32, 33-48, and 49-64; used to set up to 32 channel pairs as stereo linksStereo Link Defeat Bypasses DIP switch stereo link settingsDisable DIP switch Chooses Dante (down) or A-Net In (up) as the input source for the D800-DanteID1, ID2 DIP Switch ReservedA, B, C, D DIP switch ReservedLEDs (rear panel) Error (red); Sync (green); 1GB Active (red); Network Activity (green)Supported Dante Sample Rates 44.1, 48kHz - 64 channels 88.2, 96kHz - 32 channels 176.4, 192kHz - 16 channelsStatic IP support YesAES67 Support Yes
Description
| Brand: | Aviom | Country/Region of Manufacture: | United States |
| Model: | D800-Dante | MPN: | Does Not Apply |
| UPC: | Does not apply |
D800 & D800-Dante A-Net DistributorsThe D800 and D800-Dante A-Net Distributors provide the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utlitizing standard Cat-5e cables.Both units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.The D800 and D800-Dante can be used with A-16II, A320, and A360 Personal Mixers in any combination.Simple setup. Powerful performance.On the most basic level, the D800 and the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.Get more channels to your mixersUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800 and D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.Connect directly to DanteIf your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers.Dante Sample Rates Up to 192kHzWith the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).Get more channels to your mixersUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800 and D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.Connect directly to DanteIf your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers.Dante Sample Rates Up to 192kHzWith the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).Technical SpecificationsA-Net to/from Personal Mixers (front panel): Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)A-Net In or A-Net Bridge In Accepts Pro16 or Pro16e A-Net; one locking RJ45 connectorA-Net Out (rear panel) Pro16e A-Net; one locking RJ45 connector, unpoweredA-Net Mixes Out Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal MixersEthernet One RJ45 connectorLEDs Power On (red); Sync (green)USB Used for firmware updatesA-Net Cables Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connectionsOutput Voltage for Personal Mixers 24VDC, 0.5 ampTransmitted over the Cat-5e cablePower Supply Internal, universal switching type, IEC connectorInput Voltage 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4ALDimensions 19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) highWeight 12.0 lbs (5.44 kg)Dante SpecificationsDante Primary I/O Locking RJ45 connectorDante Secondary I/O Locking RJ45 connectorStereo Link Four DIP Switch blocks: 1-16, 17-32, 33-48, and 49-64; used to set up to 32 channel pairs as stereo linksStereo Link Defeat Bypasses DIP switch stereo link settingsDisable DIP switch Chooses Dante (down) or A-Net In (up) as the input source for the D800-DanteID1, ID2 DIP Switch ReservedA, B, C, D DIP switch ReservedLEDs (rear panel) Error (red); Sync (green); 1GB Active (red); Network Activity (green)Supported Dante Sample Rates 44.1, 48kHz - 64 channels 88.2, 96kHz - 32 channels 176.4, 192kHz - 16 channelsStatic IP support YesAES67 Support Yes