Back to the main page Back to category Rickenbacker Combo 400 Guitar Fr
musical instrument details
Rickenbacker Combo 400 guitar FROM JAPAN/512
Estimated price for orientation: 4 065 $
Category: Rickenbacker Combo 400 Guitar Fr
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Rickenbacker Model: Combo 400 MPN: Combo 400 String Configuration: 6 String UPC: Does not apply
Alder body, Thru neck structure of Alder neck, pick guard is made of anodized steel, one DeArmond single pickup installed, control is VOL, TONE, low cut switch. There are scratches on the body, especially on the left side there are two large scratches on the left side. The body color is black, but the body top is matted like a black repaint, and I feel that it is not professional work. The pick screw set screw is exchanged for a commercially available plus head thing.
There seems to be some cracks at the end of the 3 piece piece of the neckhead, but there seems to be no problem in particular. There was a gully in the VOL, TONE, and the jack, the shaft was broken, so we changed it to a commercially available pot, and we replaced the knob with a commercially available part. The low-cut ON-OFF switch does not seem to know much about its effect, but it is leaving the original for the time being. The neck is almost straight on the 1st string side, the 6th string side is slightly in order, the truss rod is full. A slight chatter is felt in the 4-string low fret, and a little fret / burr comes out overall. I think that there is no big hindrance to playing for now.
Although it is in a state where elapsed years are felt, it is a crisp and crispy Ricken backer that sounds good and it feels good and pleasant sound.
It is with a commercial general-purpose soft case. ●Condition neck is good
frets About 80%
others:
Total condition: You can check it by listed pics. ●Weight ●Serial No ●Includes softcase "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Rickenbacker |
| Model: | Combo 400 | MPN: | Combo 400 |
| String Configuration: | 6 String | UPC: | Does not apply |
Alder body, Thru neck structure of Alder neck, pick guard is made of anodized steel, one DeArmond single pickup installed, control is VOL, TONE, low cut switch. There are scratches on the body, especially on the left side there are two large scratches on the left side. The body color is black, but the body top is matted like a black repaint, and I feel that it is not professional work. The pick screw set screw is exchanged for a commercially available plus head thing.
There seems to be some cracks at the end of the 3 piece piece of the neckhead, but there seems to be no problem in particular. There was a gully in the VOL, TONE, and the jack, the shaft was broken, so we changed it to a commercially available pot, and we replaced the knob with a commercially available part. The low-cut ON-OFF switch does not seem to know much about its effect, but it is leaving the original for the time being. The neck is almost straight on the 1st string side, the 6th string side is slightly in order, the truss rod is full. A slight chatter is felt in the 4-string low fret, and a little fret / burr comes out overall. I think that there is no big hindrance to playing for now.
Although it is in a state where elapsed years are felt, it is a crisp and crispy Ricken backer that sounds good and it feels good and pleasant sound.
It is with a commercial general-purpose soft case. ●Condition neck is good
frets About 80%
others:
Total condition: You can check it by listed pics. ●Weight ●Serial No ●Includes softcase "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "
There seems to be some cracks at the end of the 3 piece piece of the neckhead, but there seems to be no problem in particular. There was a gully in the VOL, TONE, and the jack, the shaft was broken, so we changed it to a commercially available pot, and we replaced the knob with a commercially available part. The low-cut ON-OFF switch does not seem to know much about its effect, but it is leaving the original for the time being. The neck is almost straight on the 1st string side, the 6th string side is slightly in order, the truss rod is full. A slight chatter is felt in the 4-string low fret, and a little fret / burr comes out overall. I think that there is no big hindrance to playing for now.
Although it is in a state where elapsed years are felt, it is a crisp and crispy Ricken backer that sounds good and it feels good and pleasant sound.
It is with a commercial general-purpose soft case. ●Condition neck is good
frets About 80%
others:
Total condition: You can check it by listed pics. ●Weight ●Serial No ●Includes softcase "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "