Back to the main page Back to category Seymour Duncan Pearly Gates Humb
musical instrument details
NEW Seymour Duncan Pearly Gates Bridge & Neck Pickup Set Nickel 11108-49-NC
Estimated price for orientation: 999 $
Category: Seymour Duncan Pearly Gates Humb
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Seymour Duncan MPN: 11108-49-NC Model: pearly gates nickel set UPC: 800315040490
NEW Seymour Duncan Pearly Gates Bridge & Neck Pickup Set Nickel 11108-49-NC
Pearly Gates Bridge
SummaryImagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates.DescriptionThe Pearly Gates bridge captures all the mojo of the original bridge pickup from Billy Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The Alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. Pinch harmonics really sing with this pickup too. It really has a growl all its own and will help to bring any humbucker-style instrument to life, but it’s also great for adding some growl to a Stratocaster. Match with the Pearly Gates neck model for the full Texas experience.Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan for that unmistakable vintage mojo.OutputDCR:8.1Magnet:Alnico 2Cable:4c ShieldedPearly Gates Neck
SummaryP.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused.DescriptionThe Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character, and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with its stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Pair with the Pearly Gates bridge model for a classic setup, or match it with a higher output bridge pickup like the Custom Custom for a more aggressive rock setup.Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo.OutputDCR:7.3Magnet:Alnico 2Cable:4c ShieldedPart Number: 11108-49-NC SEYMOUR DUNCANYou may be interested in .
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Seymour Duncan |
| MPN: | 11108-49-NC | Model: | pearly gates nickel set |
| UPC: | 800315040490 |
NEW Seymour Duncan Pearly Gates Bridge & Neck Pickup Set Nickel 11108-49-NC
Pearly Gates Bridge
SummaryImagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates.DescriptionThe Pearly Gates bridge captures all the mojo of the original bridge pickup from Billy Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The Alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. Pinch harmonics really sing with this pickup too. It really has a growl all its own and will help to bring any humbucker-style instrument to life, but it’s also great for adding some growl to a Stratocaster. Match with the Pearly Gates neck model for the full Texas experience.
SummaryP.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused.DescriptionThe Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character, and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with its stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Pair with the Pearly Gates bridge model for a classic setup, or match it with a higher output bridge pickup like the Custom Custom for a more aggressive rock setup.Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo.
Pearly Gates Bridge
SummaryImagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates.DescriptionThe Pearly Gates bridge captures all the mojo of the original bridge pickup from Billy Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The Alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. Pinch harmonics really sing with this pickup too. It really has a growl all its own and will help to bring any humbucker-style instrument to life, but it’s also great for adding some growl to a Stratocaster. Match with the Pearly Gates neck model for the full Texas experience.
Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan for that unmistakable vintage mojo.
Pearly Gates NeckOutputDCR:8.1Magnet:Alnico 2Cable:4c Shielded
SummaryP.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused.DescriptionThe Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character, and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with its stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Pair with the Pearly Gates bridge model for a classic setup, or match it with a higher output bridge pickup like the Custom Custom for a more aggressive rock setup.Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo.
OutputDCR:7.3Magnet:Alnico 2Cable:4c Shielded
Part Number: 11108-49-NC SEYMOUR DUNCANYou may be interested in .