QSC KW122 Package Includes 2- QSC KW122 Speakers & 2- Ultimate Support TS-100B Air Powered Speaker Stands QSC KW122 Active Loudspeaker                        Building on the success of our K Series, the KW Series represents the next evolutionary step in wood enclosure loudspeakers. Our system engineers have created the KW Series to feature all the groundbreaking electronic attributes of our popular K Series while at the same time designing a product that is both smaller and significantly lighter than previous wood enclosure models. Features K Series performance in a lightweight, birch design 1000 watt Class D power modules in all models (2 x 500 W continuous) Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field Rugged, texture-painted birch enclosures Four-position Mic/Line gain (full-range models) Tour-grade 16 gauge steel grilles Comfortable ergonomic handles 35 mm pole sockets with Tilt-Direct™ on KW122 and KW152, standard (non-tilt) pole socket on KW153 M10 rigging points for suspended installation (full-range models) KW122 also functions as stage monitorHigh Output: Like K Series, each of the four KW Series models features a QSC designed, 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition, every model is fitted with the identical high-output 1.75" HF device (full-range models) and woofers of the same high quality design, regardless of speaker size.Defined Coverage Area: Directivity Matched Transition (DMT™) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.DSP: Extensive signal processing is employed throughout, providing levels of sonic clarity and total output that defy all expectations for a product in this category: Intrinsic Correction™, first featured in our high-end line array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field. DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.Connectivity: KW Series features a four-position mic / line gain switch that allows for connection of a wide variety of devices. Combo XLR and 1/4" TRS inputs accept both mic and line level input while a set of RCA phono inputs (except KW181) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.Control: On-board switches provide preset EQ settings. The HF setting (full-range models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (full-range models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.Tilt-Direct™: The KW122 and KW152 feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired.Remote Gain: Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Phoenix-Style connector. In an installed application, multiple KW Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.Premium-grade materials: KW Series is designed to withstand the rigors of professional use. Advanced construction processes, premium-grade Baltic birch cabinetry, ergonomic, cast aluminum handles, low-noise casters (KW181) and a highly protective steel grille provide for ease of transport and long term durability. Integrated M10 suspension points allow for flown applications with a KW M10 KIT (sold separately) and a threaded pole receptacle (KW181) provides for a positive, wobble free connection to a threaded speaker pole (included).

SPECIFICATIONS	KW122
Configuration	12" 2-way multipurpose
Transducers   Low-frequency   Mid-frequency   High-frequency	12" cone transducer - 1.75" diaphragm compression driver
Frequency Response (-6 dB)	53 Hz - 18 kHz
Frequency Range (-10 dB)	50 Hz - 20 kHz
Nominal Coverage (-6 dB)	75° axisymmetric
Maximum SPL1	131 dB peak
Amplifier
Power Output2	1000 W Class D (500 W LF, 500 W HF) continuous 2000 W peak
Input Impedance (ohms)	Channel A XLR / ¼": Mic gain setting Balanced Unbalanced 0 dB 38k 19k +12 dB 10k 5k +24 dB 2.66k 1.33k +36 dB 660 ohms 330 ohms Channel B XLR / ¼": 38k balanced / 19k unbalanced Channel B RCA: 10k
Controls	Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators	Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors	Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling	On demand, 50 mm variable speed fan
Amplifier Protection	Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection	Thermal limiting, excursion limiting
AC Power Input	Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)	100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material	15 mm painted birch plywood
Finish	Black textured paint
Grille	Black powder coated 16 gauge steel
Dimensions (HWD)	26" x 15" x 15.4" 660 mm x 381 mm x 391 mm
Weight (Net)	49 lb (22.2 kg)
Available Accessories	KW SUS KIT 122, KW122 COVER, KW M10 KIT

ULTIMATE SUPPORT TS-100B
AIR POWERED SPEAKER STANDS Air-Powered Series speaker stands from Ultimate Support represent everything all other speaker stands aspire to be. They're incredibly strong, extraordinarily sturdy, lightweight, 100% field serviceable, AND raise and lower speaker stands on their own! Driven by innovation and years of research and development, the Air-Powered Series feature an internal shock that lifts speakers weighing 50 lbs and less with no effort, and requires just one hand's worth of effort to raise speakers weighing more than 50 lbs! Raise and Lower the Speaker with Ease!
The TS-100 is the easiest speaker stand to use thanks to the internal air-powered shock that literally raises the speaker for you. The stand's internal shock easily raises speakers weighing 50 lbs and less with no effort from the user (the Mackie SRM Series, JBL EON Series, and QSC K Series all weigh far less than 50 lbs, for instance). And, the TS-100 requires very little effort from the end user to raise speakers weighing more than 50 lbs. When you're ready to lower the speaker, we've provided a convenient and ergonomic hand grip from which you can lower the speaker - with just one hand. There's never been an easier, more convenient, or safer way to set up and tear down speakers. Patented Tripod Design, Over-sized Heavy Wall Aluminum Tubing The TS-100's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs. The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-100 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight. 100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-100 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-100, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!
Part Name: TS-100B
Part Number: 16759
Height: 3' 8" - 6' 7" (1118 mm - 2007 mm)
Weight: 12.1 lbs. (5.5 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm)