TECHNICS SU-8080 AMPLIFIER  For North America 120vac ,  Not the Europe 240vac model that no one wants !!97% COSMETICS 100% TESTED WORKING PERFECTLY GREAT SOUNDSOME BLEMISHES AS IN PHOTOS,  ALL IS TESTED AND IS WORKING FINEAN AMAZING SOUND RARE AND HARD TO FIND NOW, HIGH QUALITY AUDIO CAPACITORS , DUAL TRANSFORMERS, TO3 TRANSISTOR OUTPUTDUE TO THE AGE OF THIS AMPLIFIER ALL SALES WILL BE FINAL, THIS IS A  WYSIWYG LISTING !!SOLD "AS IS"  BUT 100% WORKING , JUST HOOK IT UP AND PLAY !!!PLEASE NOTE A LOT OF CARE WAS TAKEN TO SHOW YOU THE INSIDE OF THIS AMPLIFIER FIRSTLYSO THE TOP COVER,  BOTTOM PANEL AND CAPACITOR TOP PLATE  WERE TAKEN OFF WITH GREAT CARE AND PLACED BACK CAREFULLY !!!EMAIL ME ANY QUESTIONS BELOW

DescriptionThe Technics SU-8080 features 2 phono, tuner, aux and tape inputs. The phono inputs have selectable input resistance and capacitance for cartridge matching and switchable high frequency and subsonic filters. The unit is also fitted with stereo balance and tone controls. Power output: 72 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.02%Damping factor: 70Input sensitivity: 2.5mV (MM), 200mV (line)Signal to noise ratio: 88dB (MM), 100dB (line)Output: 200mV (line), 1V (Pre out)Speaker load impedance: 4Ω to 16ΩDimensions: 450 x 140 x 371mmWeight: 13.5kg  OR  30 lbs.______________________________________________________________
Description 2,   Technics SU-8080 POWER AMPLIFIER SECTION
1 kHz continuous power output
both channels driven 92W + 92W (4ohm),74W + 74W (8ohm)
20Hz-20 kHz continuous power output
both channels driven 90W + 90W (4ohm). 72W + 72W (8ohm)
Power bandwidth (both channels driven at 8 ohm
5 Hz-40 kHz, -3 dB
Total harmonic distortion
rated power at 1 kHz (8ohm), 4ohm 0.02%
rated power at 20 Hz -20 kHz (8ohm) 0.02%
rated power at 20 Hz -20 kHz (4ohm) 0.05%
half power at 1 kHz (8ohm, 4ohm) 0.0015%Frequency response 20 Hz-20 kHz, +0 dB, -0.1 dB
                              0 Hz-100 kHz, +0 dB, -3 dBS/N (IHF, Al ) 115 dBResidual hum & noise  100 micro VoltDamping factor  35 4ohm , 70 8ohm
Input sensitivity & Impedance 1V / 50 kohm
Load impedance   MAIN or REMOTE 4 to 16 ohm
                          MAIN + REMOTE 8 to 16 ohmPRE AMPLIFIER SECTIONInput sensitivity & impedance
PHONO 1, 2   2.5mV /47kohm, 27kohm
TUNER, AUX  200mV/35kohm
REC/PLAY input (TAPE DECK 1) 200mV/35kohm
PLAYBACK (TAPE DECK 1, 2) 200mV/35kohm
PHONO 1, 2 maximum input voltage (1 kHz, RMS) 280mV
Total harmonic distortion 0.01%
S/N (IHF,A) PHONO 1,2 88 dB
TUNER, AUX via tone 100 dB direct 106 dBFrequency response
PHONO 1, 2 RIAA standard curve ±0.2 dB
TUNER, AUX 20 Hz-20 kHz, +0 dB, -0.1 dB
Tone controls BASS 50Hz,+7.5dB--7.5dB
TREBLE 20kHz,+7.5dB - -7.5dB
Filters equalizer subsonic filter 30 Hz, -12 dB /oct.
high filter 10 kHz, -6 dB/act.
Loudness control (volume at -30 dB) 100 Hz, +8 dB
Muting -14dB
Output voltage & impedance
PREOUT rated 1V/1kohm
REC/PLAY output (TAPE DECK 1)
maximum 9V/1kohm
30mV/82kohm
REC OUT (TAPE DECK 1, 2) 200mVGENERAL
Power supply (50/60 Hz) 110V /120V /220V /240V
240V only (Set for Australia)
Power consumption 490W
570W (Set for united kingdom)
Dimensions (WxHxD) 450mm x 140mm x 371mm (17" x 5" x 14")
Weight 14 kg (30.9 lb.)