Back to the main page Back to category Speakers and Monitors
musical instrument details
TURBOSOUND IQ12 5000w Peak Active DSP Ultranet USB Control PA System Pair
Estimated price for orientation: 1 299 $
Category: Speakers and Monitors
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: TURBOSOUND Features: 2-Way Configuration, Flyable, Portable, PC / iOS Control, DSP, Ultranet, USB Interface, Built-in Mixer Type: PA Speaker System RMS Power: 5000W Total Peak Model: IQ12 Country/Region of Manufacture: United States MPN: IQ12 Speaker Type: 12" Woofer Active/Passive: Active Horn: 1" Titanium UPC: 748252143846
iQ12 TURBOSOUND 5000w Peak Active 12" PA System The Turbosound iQ12 is a 2500 Watt (peak) powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 12" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminum voice coil for extended high frequency reproduction. Equipped with a very efficient and lightweight two channel Klark Teknik Class 'D' power amplifier, the iQ12 provides an impressive 2500 Watts (peak) of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ12’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers. Klark Teknik also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimize the iQ12’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel. The iQ12 also features Turbosound's proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analog methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ12 via PC, as well as DSP and speaker modeling firmware updates. The lightweight fiberglass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ12 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON connectors. Features: 2-way full range loudspeaker for portable PA and installation applications 2500 Watt power featuring Klark Teknik Class-D technology Klark Teknik Digital Signal Processing for total system control Speaker modeling includes accurate models of industry standard speakers SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement ULTRANET digital audio networking connects to mixers and other sources 12" low frequency driver with low mass voice coil for improved transient response High temperature 1" compression driver with copper-clad aluminum voice coil for extended high frequency reproduction Fully featured user interface with LCD display for ease of navigation PC remote control software downloadable at turbosound.com Lightweight fiber glass reinforced composite enclosure Rugged powder coated perforated steel mesh grille Dual angle pole mount for accurate audience coverage Multiple internal rigging points for installation applications Mains input and link output on Neutrik powerCON connectors 3-Year Warranty Program Designed and engineered in England Specifications: Frequency Response: 52 Hz – 18 kHz ±3 dB; 45 Hz – 20 kHz -10 dB Nominal Dispersion: 80° H x 60° V @ -6 dB points Maximum SPL: 125 dB peak Crossover type: Active Transducers: 1 x 12" (308.5 mm) LF driver; 1 x 1" (25.4 mm) HF compression driver Limiter: Independent HF, LF, peak and rms Maximum output power: 2500 W Type: Class 'D' Protection: Short circuit, open circuit, thermal Input A / B: 2 x combo jack/XLR Sensitivity: Line +4 dBu, mic -22 dBu, switchable Input impedance: 20 kOhms unbalanced, 40 kOhms balanced Maximum input level: +21 dBu Output A / B: 2 x XLR Linked to input Mix output: XLR, balanced Output impedance: 100 Ohms unbalanced, 200 Ohms balanced Ultranet input/link: 2 x RJ45 Mains Supply: Neutrik powerCON input 20A and link 15A DSP: Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER Mixer section: 2 x gain controls (channels A and B); 2 x Line/Mic switch Factory EQ presets: Positioning, Sound mode, Sound modeling, FBQ Display: LCD 128 x 32, blue backlit Delay: 0 - 300 ms Equalization: High and low shelving EQ, 2 x parametric EQ Limiter: Zero attack input limiter Presets: 20 total presets, 19 user-definable Crossover: High Pass L-R 24 dB/oct Protection: Lock-out function for all settings A/D conversion: 24-bit,44.1/48kHz sample rate Converter type: 24-bit,delta-sigma System Signal: 16 channels Latency: < 0.9 ms Frequency response: 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range: typical 92 dB Cables: Shielded CAT5 Cable length: max. 246 ft / 75 m recommended Power consumption: 150 W @ 1/8 max power Voltage (fuses): USA / Canada: 120 V~, 60 Hz (T 15 A H 250 V) UK / Australia / Europe: 220-240 V~, 50/60 Hz (T 10 A H 250 V) Korea / China: 220-240 V~, 50/60 Hz (T 10 A H 250 V) Japan: 100 V~, 50/60 Hz (T 15 A H 250 V) Dimensions HWD: 609 x 370 x 370 mm (24.0 x 14.5 x 14.5") Net weight: 21.1 kg (46 lbs) Construction: Injection-molded polypropylene enclosure Finish: Black painted Grille: Powder coated perforated steel Flying Hardware: M10 x 3 points Accessories: IQ12-WB Steel wall bracket SALE: $1299.99 WANT IT FOR LESS? ASK HOW YOU CAN SAVE $$$$ VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | TURBOSOUND |
| Features: | 2-Way Configuration, Flyable, Portable, PC / iOS Control, DSP, Ultranet, USB Interface, Built-in Mixer | Type: | PA Speaker System |
| RMS Power: | 5000W Total Peak | Model: | IQ12 |
| Country/Region of Manufacture: | United States | MPN: | IQ12 |
| Speaker Type: | 12" Woofer | Active/Passive: | Active |
| Horn: | 1" Titanium | UPC: | 748252143846 |
iQ12 TURBOSOUND 5000w Peak Active 12" PA System The Turbosound iQ12 is a 2500 Watt (peak) powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 12" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminum voice coil for extended high frequency reproduction. Equipped with a very efficient and lightweight two channel Klark Teknik Class 'D' power amplifier, the iQ12 provides an impressive 2500 Watts (peak) of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ12’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers. Klark Teknik also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimize the iQ12’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel. The iQ12 also features Turbosound's proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analog methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ12 via PC, as well as DSP and speaker modeling firmware updates. The lightweight fiberglass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ12 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON connectors. Features: 2-way full range loudspeaker for portable PA and installation applications 2500 Watt power featuring Klark Teknik Class-D technology Klark Teknik Digital Signal Processing for total system control Speaker modeling includes accurate models of industry standard speakers SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement ULTRANET digital audio networking connects to mixers and other sources 12" low frequency driver with low mass voice coil for improved transient response High temperature 1" compression driver with copper-clad aluminum voice coil for extended high frequency reproduction Fully featured user interface with LCD display for ease of navigation PC remote control software downloadable at turbosound.com Lightweight fiber glass reinforced composite enclosure Rugged powder coated perforated steel mesh grille Dual angle pole mount for accurate audience coverage Multiple internal rigging points for installation applications Mains input and link output on Neutrik powerCON connectors 3-Year Warranty Program Designed and engineered in England Specifications: Frequency Response: 52 Hz – 18 kHz ±3 dB; 45 Hz – 20 kHz -10 dB Nominal Dispersion: 80° H x 60° V @ -6 dB points Maximum SPL: 125 dB peak Crossover type: Active Transducers: 1 x 12" (308.5 mm) LF driver; 1 x 1" (25.4 mm) HF compression driver Limiter: Independent HF, LF, peak and rms Maximum output power: 2500 W Type: Class 'D' Protection: Short circuit, open circuit, thermal Input A / B: 2 x combo jack/XLR Sensitivity: Line +4 dBu, mic -22 dBu, switchable Input impedance: 20 kOhms unbalanced, 40 kOhms balanced Maximum input level: +21 dBu Output A / B: 2 x XLR Linked to input Mix output: XLR, balanced Output impedance: 100 Ohms unbalanced, 200 Ohms balanced Ultranet input/link: 2 x RJ45 Mains Supply: Neutrik powerCON input 20A and link 15A DSP: Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER Mixer section: 2 x gain controls (channels A and B); 2 x Line/Mic switch Factory EQ presets: Positioning, Sound mode, Sound modeling, FBQ Display: LCD 128 x 32, blue backlit Delay: 0 - 300 ms Equalization: High and low shelving EQ, 2 x parametric EQ Limiter: Zero attack input limiter Presets: 20 total presets, 19 user-definable Crossover: High Pass L-R 24 dB/oct Protection: Lock-out function for all settings A/D conversion: 24-bit,44.1/48kHz sample rate Converter type: 24-bit,delta-sigma System Signal: 16 channels Latency: < 0.9 ms Frequency response: 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range: typical 92 dB Cables: Shielded CAT5 Cable length: max. 246 ft / 75 m recommended Power consumption: 150 W @ 1/8 max power Voltage (fuses): USA / Canada: 120 V~, 60 Hz (T 15 A H 250 V) UK / Australia / Europe: 220-240 V~, 50/60 Hz (T 10 A H 250 V) Korea / China: 220-240 V~, 50/60 Hz (T 10 A H 250 V) Japan: 100 V~, 50/60 Hz (T 15 A H 250 V) Dimensions HWD: 609 x 370 x 370 mm (24.0 x 14.5 x 14.5") Net weight: 21.1 kg (46 lbs) Construction: Injection-molded polypropylene enclosure Finish: Black painted Grille: Powder coated perforated steel Flying Hardware: M10 x 3 points Accessories: IQ12-WB Steel wall bracket SALE: $1299.99 WANT IT FOR LESS? ASK HOW YOU CAN SAVE $$$$ VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)