Back to the main page Back to category Electric Guitars
musical instrument details
Gibson HOWARD ROBERTS FUSION w/hardcase/512
Estimated price for orientation: 3 076 $
Category: Electric Guitars
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Gibson Model: HOWARD ROBERTS FUSION MPN: HOWARD ROBERTS FUSION String Configuration: 6 String UPC: does not apply
Guitarist who opened up a new dimension of jazz guitar, arrival of signature model of "Howard Roberts"!
The original Howard Roberts was a 16-inch full-acoustic front floating 1 pickup jazz guitar, but this FUSION model is a somewhat thin, semiaco structure with a center block and it is a 2 humbucker model. The cutaway part is designed to be bigger and have better performance at high position.
With a solid sustain and core sound, there is a sense of presence in natural tone as well as in the drive sound, and it corresponds to the performance of a wider genre.
Maple Body, Maple Neck, Ebony Fingerboard, 490 R, 490 T PU.
A tailpiece with a fine tuner called fingers is attached, and the tension of each string is individually adjustable.
The gold of the plating parts is slightly thin, but it is in a pretty beautiful state.
Scratches on the bottom of the back painted chips, chip traces on the neck heel cap edge, scratches in one place on the back of the neckback 11 flat.
The nut exchange, the reflelet readjustment completed, the playability also has been set tightly.
Currently it is set at 010 gauge, but if you are playing a jazzy performance, I think that it is good even with a thick gauge or flatwound a little more.
It is a good feeling with a deep sound which is not too hard from the sound of a front desk with a sweet elongation, a good rear sound, a mix position.
I think that it is the most suitable musical instrument for crossover fusion sound as well as naming street jazz.
Weight 3.37 kg It is with original brown hard case at that time. ●Condition neck is good
frets About %
others:
Total condition: You can check it by listed pics. all of the electronics function well.The trussrod works fine.
Please ask if you have any question. "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Gibson |
| Model: | HOWARD ROBERTS FUSION | MPN: | HOWARD ROBERTS FUSION |
| String Configuration: | 6 String | UPC: | does not apply |
Guitarist who opened up a new dimension of jazz guitar, arrival of signature model of "Howard Roberts"!
The original Howard Roberts was a 16-inch full-acoustic front floating 1 pickup jazz guitar, but this FUSION model is a somewhat thin, semiaco structure with a center block and it is a 2 humbucker model. The cutaway part is designed to be bigger and have better performance at high position.
With a solid sustain and core sound, there is a sense of presence in natural tone as well as in the drive sound, and it corresponds to the performance of a wider genre.
Maple Body, Maple Neck, Ebony Fingerboard, 490 R, 490 T PU.
A tailpiece with a fine tuner called fingers is attached, and the tension of each string is individually adjustable.
The gold of the plating parts is slightly thin, but it is in a pretty beautiful state.
Scratches on the bottom of the back painted chips, chip traces on the neck heel cap edge, scratches in one place on the back of the neckback 11 flat.
The nut exchange, the reflelet readjustment completed, the playability also has been set tightly.
Currently it is set at 010 gauge, but if you are playing a jazzy performance, I think that it is good even with a thick gauge or flatwound a little more.
It is a good feeling with a deep sound which is not too hard from the sound of a front desk with a sweet elongation, a good rear sound, a mix position.
I think that it is the most suitable musical instrument for crossover fusion sound as well as naming street jazz.
Weight 3.37 kg It is with original brown hard case at that time. ●Condition neck is good
frets About %
others:
Total condition: You can check it by listed pics. all of the electronics function well.The trussrod works fine.
Please ask if you have any question. "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "
The original Howard Roberts was a 16-inch full-acoustic front floating 1 pickup jazz guitar, but this FUSION model is a somewhat thin, semiaco structure with a center block and it is a 2 humbucker model. The cutaway part is designed to be bigger and have better performance at high position.
With a solid sustain and core sound, there is a sense of presence in natural tone as well as in the drive sound, and it corresponds to the performance of a wider genre.
Maple Body, Maple Neck, Ebony Fingerboard, 490 R, 490 T PU.
A tailpiece with a fine tuner called fingers is attached, and the tension of each string is individually adjustable.
The gold of the plating parts is slightly thin, but it is in a pretty beautiful state.
Scratches on the bottom of the back painted chips, chip traces on the neck heel cap edge, scratches in one place on the back of the neckback 11 flat.
The nut exchange, the reflelet readjustment completed, the playability also has been set tightly.
Currently it is set at 010 gauge, but if you are playing a jazzy performance, I think that it is good even with a thick gauge or flatwound a little more.
It is a good feeling with a deep sound which is not too hard from the sound of a front desk with a sweet elongation, a good rear sound, a mix position.
I think that it is the most suitable musical instrument for crossover fusion sound as well as naming street jazz.
Weight 3.37 kg It is with original brown hard case at that time. ●Condition neck is good
frets About %
others:
Total condition: You can check it by listed pics. all of the electronics function well.The trussrod works fine.
Please ask if you have any question. "NOTICE:
About a vintage or used item.
Please buy it, only buyer that understanding below.
There are the rusts and lack of luster of metal department, weather check,
scratches, paint burnt, painting peel off, cracks and dents on body by aged degradation. "