Back to the main page Back to category Live and Studio Mixers
musical instrument details
ASHLY FR-8 8 Channel Network Fader Remote Control Mixer
Estimated price for orientation: 574 $
Category: Live and Studio Mixers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: ASHLY Number of Channels: 8 Analog/Digital: Digital MPN: FR-8 Powered/Non-Powered: Non-Powered Model: FR-8 Features: Fader-Type Control, Wall-Mountable Country/Region of Manufacture: United States Inputs/Outputs: RJ-45 Suited For: Event / Install UPC: Does not apply
FR-8 ASHLY Network Fader Remote Control Mixer The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and the FR-16 controls up to 16. The following Ashly products can be controlled: ne24.24M, NE two-channel power amplifiers with DSP, NE multi-channel power amplifiers with DSP, ne4800/8800 DSP processors, and all PÊMA™ power amplifiers. The FR-8 and FR-16 are powered using Class 2 IEEE 802.3af Power over Ethernet (PoE), or by an external PoE injector when PoE is unavailable. Ethernet communication with this device is made by wiring it with standard Cat-5 cable terminated with an RJ-45 connector through an Ethernet network router, switch, hub, or patch panel to a Windows™ PC running Ashly's Protea NE Software v5.10 or higher. The FR-8 and FR-16 connects to Ethernet using a standard RJ-45, as well as Neutrik's etherCON™ heavy duty RJ-45. Maximum cable distance is 100 meters (328 ft) from the nearest router, hub, or switch. The FR remotes will automatically assign their IP address. Each channel fader can control input gain, output gain, or mixer gain levels as assigned in software. The master fader provides an overall level control for user assigned faders, or can be disabled. Assignable fader scaling allows the user to place an upper and lower limit on the range of level control for each individual fader. Buttons above each fader provide mute (red = mute), or can be individually configured as two color (green/amber) signal level indicators with user defined break points. If an individual fader has been assigned to control a targeted device function, but contact with that device is interrupted for any reason, the fader's LED will flash to indicate the failed communication status. A clear window is provided above and below each fader for the insertion of user defined labels, available on the Ashly website as a document template. The FR-8 will mount to a standard US four-gang electrical wall box, and the FR-16 will mount to a seven-gang wall box. Alternately, the units can be mounted to a flat surface with a cutout, or can be used as a freestanding desktop device. On the rear panel, a contact closure terminal can be connected to a keyed switch to lockout all front panel controls, preventing any unwanted changes. Features: Remote level control for your system FR-8: 8 assigned blocks IEEE 802.3af Power over Ethernet (PoE) (class 2) Automatic IP Addressing Assignable fader scaling Signal level option on illuminated mute buttons Assignable signal LED breakpoints Communication failure indicator User defined labels per channel Mounting: Standard US wall box (4 or 7 gang) Surface mount with panel cutout Freestanding desktop Panel lock-out contact closure For use with these Ashly products: NE24.24M NE two-channel power amps (pe) NE multi-channel power amps (pe) NE4400 / NE4800 / NE8800 DSP processors PÊMA™ powered processors Use along with NEWR-5 wall remote SALE: $574.99 WANT IT FOR LESS...CLICK me IN SELLER INFORMATION BOX VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | ASHLY |
| Number of Channels: | 8 | Analog/Digital: | Digital |
| MPN: | FR-8 | Powered/Non-Powered: | Non-Powered |
| Model: | FR-8 | Features: | Fader-Type Control, Wall-Mountable |
| Country/Region of Manufacture: | United States | Inputs/Outputs: | RJ-45 |
| Suited For: | Event / Install | UPC: | Does not apply |
FR-8 ASHLY Network Fader Remote Control Mixer The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and the FR-16 controls up to 16. The following Ashly products can be controlled: ne24.24M, NE two-channel power amplifiers with DSP, NE multi-channel power amplifiers with DSP, ne4800/8800 DSP processors, and all PÊMA™ power amplifiers. The FR-8 and FR-16 are powered using Class 2 IEEE 802.3af Power over Ethernet (PoE), or by an external PoE injector when PoE is unavailable. Ethernet communication with this device is made by wiring it with standard Cat-5 cable terminated with an RJ-45 connector through an Ethernet network router, switch, hub, or patch panel to a Windows™ PC running Ashly's Protea NE Software v5.10 or higher. The FR-8 and FR-16 connects to Ethernet using a standard RJ-45, as well as Neutrik's etherCON™ heavy duty RJ-45. Maximum cable distance is 100 meters (328 ft) from the nearest router, hub, or switch. The FR remotes will automatically assign their IP address. Each channel fader can control input gain, output gain, or mixer gain levels as assigned in software. The master fader provides an overall level control for user assigned faders, or can be disabled. Assignable fader scaling allows the user to place an upper and lower limit on the range of level control for each individual fader. Buttons above each fader provide mute (red = mute), or can be individually configured as two color (green/amber) signal level indicators with user defined break points. If an individual fader has been assigned to control a targeted device function, but contact with that device is interrupted for any reason, the fader's LED will flash to indicate the failed communication status. A clear window is provided above and below each fader for the insertion of user defined labels, available on the Ashly website as a document template. The FR-8 will mount to a standard US four-gang electrical wall box, and the FR-16 will mount to a seven-gang wall box. Alternately, the units can be mounted to a flat surface with a cutout, or can be used as a freestanding desktop device. On the rear panel, a contact closure terminal can be connected to a keyed switch to lockout all front panel controls, preventing any unwanted changes. Features: Remote level control for your system FR-8: 8 assigned blocks IEEE 802.3af Power over Ethernet (PoE) (class 2) Automatic IP Addressing Assignable fader scaling Signal level option on illuminated mute buttons Assignable signal LED breakpoints Communication failure indicator User defined labels per channel Mounting: Standard US wall box (4 or 7 gang) Surface mount with panel cutout Freestanding desktop Panel lock-out contact closure For use with these Ashly products: NE24.24M NE two-channel power amps (pe) NE multi-channel power amps (pe) NE4400 / NE4800 / NE8800 DSP processors PÊMA™ powered processors Use along with NEWR-5 wall remote SALE: $574.99 WANT IT FOR LESS...CLICK me IN SELLER INFORMATION BOX VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)