Back to the main page Back to category Stage Lighting Controllers
musical instrument details
Martin RDM 5.5 5-Pin 5-Ch DMX Splitter - New
Estimated price for orientation: 861 $
Category: Stage Lighting Controllers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Martin Professional MPN: 90758150 UPC: Does not apply
Powered by Frooition Pro Martin RDM 5.5 5-Pin 5-Ch DMX Splitter - New Item Description Martin RDM 5.5 5-Pin 5-Channel DMX Splitter The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal. Features: DMX Splitter/Booster Opto-isolated DMX Output ports DMX loop through port with built-in termination 5-pin XLR Input and Outputs RDM E1.20 compliant Optimized for Martin fixture firmware upload Universal power supply PowerCon connectors in/out for easy daisy-chaining Lightweight yet robust construction Rack, truss and wall mountable Specifications:Physical Depth: 125 mm Width: 220 mm Height: 45 mm Weight: 0.9 kg Data signal DMX: ANSI E1.11 (USITT DMX 512-A) RDM: ANSI E1.20 Electrical standard: EIA-485 Recommended cable type: STP (Shielded Twisted Pair) Recommended cable gauge: 22 or 24 AWG Construction Housing: Aluminum Finish: Electrostatic powder-coated Connections Data input: 5-pin XLR male Data throughput (not amplified or branched): 5-pin XLR female Data outputs (optically isolated and amplified): 5 x 5-pin XLR female AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical total power consumption: 4 W * Power consumption figures are typical, not maximum. Allow for +/-10% variation. Approvals EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2 US safety: UL 508 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA C22.2 No. 14 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 Included Items 4 x screws to join two devices for rack mounting 2 x L-brackets + 8 x screws for 19-inch rack mounting Two Splitters (1U) for surface mounting Neutrik PowerCon NAC3FCA male input connector SKU: 91350-A About Us ProSound And Stage Lighting (PSSL or PSSL.com as we have become to be known) has grown to one of the largest and most respected sources of professional audio and lighting equipment in the United States. We are located in Cypress, California - right down the road from Disneyland! Our goal at PSSL.com is to exceed our customer's expectations at every point of contact. To meet this goal we must provide excellent products and outstanding customer service, all at guaranteed low prices. Total customer satisfaction will always be our bottom line. Payment Paypal: We accept Paypal payments. Credit Cards: We gladly accept U.S. issued Visa, Master Card, American Express, and Discover credit cards, with verifiable shipping address. For your protection, orders are sent only to the billing address of the cardholder. Special arrangements may be made for orders that need to ship to an alternate address. Call 1-888-220-3159 for details. Credit cards are not charged until your order is shipped. Purchase Orders: For the convenience of our larger business, institutional and government customers, purchase orders will be accepted on an approved basis. Orders can be placed by phone providing a confirming fax or mailed copy of the purchase order is received. Minimum $100 for first time Purchase Orders. Call commercial accounts for more information at 1-800-678-9700. NOTE: Payment must be received within seven (7) days of auction close. Unpaid auction wins will be forfeited after seven (7) days and a Non-Payer report will be filed with eBay to recover the closing fees of the auction. If you wish to combine multiple auctions for shipping, please make sure the closing dates from the first auction to the last auction are within seven days. Payment Instructions
After winning an item in an auction or completing a Buy It Now purchase, you will have two (2) check-out options: Pay Now: Click the 'Pay Now' button on the top of the ad to immediately proceed with the checkout and payment process. Select 'Pay Now' ONLY after winning an item in auction or completing a Buy It Now
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Martin Professional |
| MPN: | 90758150 | UPC: | Does not apply |
Powered by Frooition Pro
Martin RDM 5.5 5-Pin 5-Ch DMX Splitter - New
Item Description
Martin RDM 5.5 5-Pin 5-Channel DMX Splitter The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal. Features: DMX Splitter/Booster Opto-isolated DMX Output ports DMX loop through port with built-in termination 5-pin XLR Input and Outputs RDM E1.20 compliant Optimized for Martin fixture firmware upload Universal power supply PowerCon connectors in/out for easy daisy-chaining Lightweight yet robust construction Rack, truss and wall mountable Specifications:Physical Depth: 125 mm Width: 220 mm Height: 45 mm Weight: 0.9 kg Data signal DMX: ANSI E1.11 (USITT DMX 512-A) RDM: ANSI E1.20 Electrical standard: EIA-485 Recommended cable type: STP (Shielded Twisted Pair) Recommended cable gauge: 22 or 24 AWG Construction Housing: Aluminum Finish: Electrostatic powder-coated Connections Data input: 5-pin XLR male Data throughput (not amplified or branched): 5-pin XLR female Data outputs (optically isolated and amplified): 5 x 5-pin XLR female AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical total power consumption: 4 W * Power consumption figures are typical, not maximum. Allow for +/-10% variation. Approvals EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2 US safety: UL 508 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA C22.2 No. 14 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 Included Items 4 x screws to join two devices for rack mounting 2 x L-brackets + 8 x screws for 19-inch rack mounting Two Splitters (1U) for surface mounting Neutrik PowerCon NAC3FCA male input connector SKU: 91350-A
About Us ProSound And Stage Lighting (PSSL or PSSL.com as we have become to be known) has grown to one of the largest and most respected sources of professional audio and lighting equipment in the United States. We are located in Cypress, California - right down the road from Disneyland! Our goal at PSSL.com is to exceed our customer's expectations at every point of contact. To meet this goal we must provide excellent products and outstanding customer service, all at guaranteed low prices. Total customer satisfaction will always be our bottom line.
Payment Paypal: We accept Paypal payments. Credit Cards: We gladly accept U.S. issued Visa, Master Card, American Express, and Discover credit cards, with verifiable shipping address. For your protection, orders are sent only to the billing address of the cardholder. Special arrangements may be made for orders that need to ship to an alternate address. Call 1-888-220-3159 for details. Credit cards are not charged until your order is shipped. Purchase Orders: For the convenience of our larger business, institutional and government customers, purchase orders will be accepted on an approved basis. Orders can be placed by phone providing a confirming fax or mailed copy of the purchase order is received. Minimum $100 for first time Purchase Orders. Call commercial accounts for more information at 1-800-678-9700. NOTE: Payment must be received within seven (7) days of auction close. Unpaid auction wins will be forfeited after seven (7) days and a Non-Payer report will be filed with eBay to recover the closing fees of the auction. If you wish to combine multiple auctions for shipping, please make sure the closing dates from the first auction to the last auction are within seven days. Payment Instructions
After winning an item in an auction or completing a Buy It Now purchase, you will have two (2) check-out options: Pay Now: Click the 'Pay Now' button on the top of the ad to immediately proceed with the checkout and payment process. Select 'Pay Now' ONLY after winning an item in auction or completing a Buy It Now
After winning an item in an auction or completing a Buy It Now purchase, you will have two (2) check-out options: Pay Now: Click the 'Pay Now' button on the top of the ad to immediately proceed with the checkout and payment process. Select 'Pay Now' ONLY after winning an item in auction or completing a Buy It Now