Back to the main page Back to category Microphones and Wireless Systems
musical instrument details
TW-LP44 4in/4out Audio Field Portable Sound Mixer avec son alimentation secteur
Estimated price for orientation: 720 $
Category: Microphones and Wireless Systems
Class:
Description Condition: New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
TW-LP44 4in/4out Audio Field Portable Sound Mixer avec son alimentation secteur 100 Volt-240 Volt , sa sacoche et sa sangle.
En très bon état comme neuf, fonctionne parfaitement
FRONT PANEL
4 / 4 switch: with channel 1 switched in L, channel 2 switched in R, the four inputs can be controlled independently to the four outputs. On the meters, the L–R or 3–4 channels’ levels are shown, depending on the meter select switch position. The four mixed signs can be heard with monitor switch in L+R position
PWR LED: lights when power is on, flashes for low power
Two headphone jacks
Peak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
Slate microphone pushbutton
Headphone monitoring selector
Reference 1 kHz sine wave generator switch
Battery test pushbutton
Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
Limiter switches separately for each channel
Direct / Tape switch for return 1 & 2
Low-cut filter switches
Pre-fade listen pushbuttons
Master fader
INPUT PANEL
Four balanced XLR inputs
Mic power selectors 48V, 12V, T
Mic / Line level switches
Attenuation –10 dB pad
Phase reverse channel 2 & 4
Phantom power on-off switch
OUTPUT PANEL
Four XLR transformer balanced outputs
Hirose 10 pin connector to camera
Neutrik 4 pin connector for charger and external power
Mic / Line switches, RTN return select switch
Mono mix to the video assist, IFB
3.5 Jack monitor in for tape return from camera
Hi12pin connector for unbalanced outputs and RTNSPECIFICATIONSFrequency response: 20 Hz – 20 kHz ± 2 dB
Distortion: less than 0.2 % THD S/N ratio > 65 dB (EIN: –125 dBv) Maximum output level: +18 dBu Low-cut Filters: 80 or 160 Hz, 14 dB / octave Size: 255 x 165 x 65 mm 10 x 6.5 x 2.6 in Weight: 2,0 kg (4.5 lbs) http://www.twelco.hu/lp44umen.pdf
Description
| Condition: | New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
TW-LP44 4in/4out Audio Field Portable Sound Mixer avec son alimentation secteur 100 Volt-240 Volt , sa sacoche et sa sangle.
En très bon état comme neuf, fonctionne parfaitement
FRONT PANEL
4 / 4 switch: with channel 1 switched in L, channel 2 switched in R, the four inputs can be controlled independently to the four outputs. On the meters, the L–R or 3–4 channels’ levels are shown, depending on the meter select switch position. The four mixed signs can be heard with monitor switch in L+R position
PWR LED: lights when power is on, flashes for low power
Two headphone jacks
Peak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
Slate microphone pushbutton
Headphone monitoring selector
Reference 1 kHz sine wave generator switch
Battery test pushbutton
Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
Limiter switches separately for each channel
Direct / Tape switch for return 1 & 2
Low-cut filter switches
Pre-fade listen pushbuttons
Master fader
INPUT PANEL
Four balanced XLR inputs
Mic power selectors 48V, 12V, T
Mic / Line level switches
Attenuation –10 dB pad
Phase reverse channel 2 & 4
Phantom power on-off switch
OUTPUT PANEL
Four XLR transformer balanced outputs
Hirose 10 pin connector to camera
Neutrik 4 pin connector for charger and external power
Mic / Line switches, RTN return select switch
Mono mix to the video assist, IFB
3.5 Jack monitor in for tape return from camera
Hi12pin connector for unbalanced outputs and RTNSPECIFICATIONSFrequency response: 20 Hz – 20 kHz ± 2 dB
Distortion: less than 0.2 % THD S/N ratio > 65 dB (EIN: –125 dBv) Maximum output level: +18 dBu Low-cut Filters: 80 or 160 Hz, 14 dB / octave Size: 255 x 165 x 65 mm 10 x 6.5 x 2.6 in Weight: 2,0 kg (4.5 lbs) http://www.twelco.hu/lp44umen.pdf
En très bon état comme neuf, fonctionne parfaitement
FRONT PANEL
4 / 4 switch: with channel 1 switched in L, channel 2 switched in R, the four inputs can be controlled independently to the four outputs. On the meters, the L–R or 3–4 channels’ levels are shown, depending on the meter select switch position. The four mixed signs can be heard with monitor switch in L+R position
PWR LED: lights when power is on, flashes for low power
Two headphone jacks
Peak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
Slate microphone pushbutton
Headphone monitoring selector
Reference 1 kHz sine wave generator switch
Battery test pushbutton
Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
Limiter switches separately for each channel
Direct / Tape switch for return 1 & 2
Low-cut filter switches
Pre-fade listen pushbuttons
Master fader
INPUT PANEL
Four balanced XLR inputs
Mic power selectors 48V, 12V, T
Mic / Line level switches
Attenuation –10 dB pad
Phase reverse channel 2 & 4
Phantom power on-off switch
OUTPUT PANEL
Four XLR transformer balanced outputs
Hirose 10 pin connector to camera
Neutrik 4 pin connector for charger and external power
Mic / Line switches, RTN return select switch
Mono mix to the video assist, IFB
3.5 Jack monitor in for tape return from camera
Hi12pin connector for unbalanced outputs and RTNSPECIFICATIONSFrequency response: 20 Hz – 20 kHz ± 2 dB
Distortion: less than 0.2 % THD S/N ratio > 65 dB (EIN: –125 dBv) Maximum output level: +18 dBu Low-cut Filters: 80 or 160 Hz, 14 dB / octave Size: 255 x 165 x 65 mm 10 x 6.5 x 2.6 in Weight: 2,0 kg (4.5 lbs) http://www.twelco.hu/lp44umen.pdf