Back to the main page Back to category Audio Power Conditioners
musical instrument details
Furman ASD-120 2.0 6-channel Sequencing Power Distributor. U.S Authorized Dealer
Estimated price for orientation: 999 $
Category: Audio Power Conditioners
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Furman MPN: ASD-120 2.0 Model: ASD-120 2.0 Warranty:: 3 Year Manufacturer UPC: 654061041191
Furman ASD-120 2.0 Sequenced Power Distribution The ASD-120 2.0 is a six channel power sequencing device intended for use in installations where multiple electrical loads must be powered on and off in a delayed and
orderly sequence. Typical applications for the ASD-120 2.0 include: touring PA or sound reinforcement systems, musical or theatrical acts, mobile recording facilities, and
on-location film or video shoots. Essentially, any situation where AC power must be distributed to multiple circuits and activated or deactivated in discrete stages would
benefit from the use of an ASD-120 2.0.Specifications:AC Input Voltage
120/240V single phase, or 120/208V three phase.
Input Current: 120 Amps maximum
Output: Six, 120V 20A circuits
Maximum AC Current Rating
Six, 120V 20A circuits for 120A total.
Power Distribution Block
Wire Guage 2, 3, 4-6 AWG,
Phase indicators: 3 LEDs, one per phase X, Y, and Z
AC Output Receptacles
Rear Panel Outlets: 6 duplex NEMA 5-20R sequenced.
Front Panel: 6 thermal circuit breakers, one per
duplex pair.
Operating Temperature and Humidity
5 to 40C (40 to 105F), <90% Relative Humidity
User Interface:
Key-switch: Front panel, 3 position (On/Off/Remote)
Keys: Included, 1 pair
Push Button Switch: Front panel
Circuit Breakers: Front panel, push-button; 6, 20A Thermal Breakers
Output Circuit Status: Front panel indicators – one per output
Configuration Switches: Front panel, hidden by security cover;
3 maximum delay switches – 1, 2, and 4 minute
Force Off NO/NC, 12V mode On/Off, GND mode ON,
Momentary/Maintained mode selection
Fine Delay Adjustment: Potentiometer hidden by security cover.
Sequence Bypass : 6 Switches, 3 States (ON/SEQUENCE/OFF)
Phase indicators: 3 LEDs, one per phase X, Y, and Z120 amp 120 volt AC sequenced distro and controller
• Six Independent 20 amp circuits @ 120V - 120 amp total load capacity
• Six delay banks with rear panel NEMA 5-20R duplex outlets and optically
isolated DC relay outlets
• Front panel status power LED, Bypass Switch and Circuit Breaker for each
Delay Bank
• 120A power distribution block accommodates 120V/240V single phase, or
120/208-Y three phase power
• X Y Z Status LED confidence indicators for each Input Phase
• Sequence unit ON or OFF from front panel or by remote switch
• Independent three position switches to power sequence (SEQ) or Bypassed ON
or OFF each Bank
• Adjustable Delay with up to 7 Minute Interval between Banks, Total maximum
Sequence Time 35 minutes
• Remote interface with an isolated 12VDC, 250mA power source for external
secondary applications
• Signal level relay contacts (NO or NC) used to control and sequence other units
• Front panel key switch and anti-tamper DIP cover for added security
• Force Off emergency shutdown
• Rugged two rack space (2RU) chassisControl/Status/Triggering (Rear Panel)
Remote Terminal: Phoenix-type 4 Pin Connector w/Screw
Terminals;
+12V @ 250mA, STAT, REM, GND (Class 2 wiring)
+5 to 30VDC at REM input terminal.
Delay Outputs: Phoenix-type 8-Pin Connector with Screw
Terminals
6 relay contacts with NO and NC common connections
(Class 2 wiring)
A, B, C, D, E, and F relay contacts switched with output circuits,
1A@48VDC
Force Off: Phoenix-type 2 Pin Connector with Screw Terminals;
Optically isolated, 12V, 10mA current source
(Class 2 wiring)
Senses external relay contact closure
Power Consumption
Standby: 5 Watts
Sequenced ON: 20 Watts
Specifications are subject to change without notice due to design improvements and upgrades.
Safety Agency
NTRL-C, RoHS CompliantASD-120 2.0 / 19” L x 10” D x 3.5” H 16 lbs. 22”L x 18.5”D x 8”H / 18 lbs.
Video
Payment Information & Processing Time
ITEM WILL BE SHIPPED WITHIN TWO
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Furman |
| MPN: | ASD-120 2.0 | Model: | ASD-120 2.0 |
| Warranty:: | 3 Year Manufacturer | UPC: | 654061041191 |
Furman ASD-120 2.0 Sequenced Power Distribution The ASD-120 2.0 is a six channel power sequencing device intended for use in installations where multiple electrical loads must be powered on and off in a delayed and
orderly sequence. Typical applications for the ASD-120 2.0 include: touring PA or sound reinforcement systems, musical or theatrical acts, mobile recording facilities, and
on-location film or video shoots. Essentially, any situation where AC power must be distributed to multiple circuits and activated or deactivated in discrete stages would
benefit from the use of an ASD-120 2.0.Specifications:AC Input Voltage
120/240V single phase, or 120/208V three phase.
Input Current: 120 Amps maximum
Output: Six, 120V 20A circuits
Maximum AC Current Rating
Six, 120V 20A circuits for 120A total.
Power Distribution Block
Wire Guage 2, 3, 4-6 AWG,
Phase indicators: 3 LEDs, one per phase X, Y, and Z
AC Output Receptacles
Rear Panel Outlets: 6 duplex NEMA 5-20R sequenced.
Front Panel: 6 thermal circuit breakers, one per
duplex pair.
Operating Temperature and Humidity
5 to 40C (40 to 105F), <90% Relative Humidity
User Interface:
Key-switch: Front panel, 3 position (On/Off/Remote)
Keys: Included, 1 pair
Push Button Switch: Front panel
Circuit Breakers: Front panel, push-button; 6, 20A Thermal Breakers
Output Circuit Status: Front panel indicators – one per output
Configuration Switches: Front panel, hidden by security cover;
3 maximum delay switches – 1, 2, and 4 minute
Force Off NO/NC, 12V mode On/Off, GND mode ON,
Momentary/Maintained mode selection
Fine Delay Adjustment: Potentiometer hidden by security cover.
Sequence Bypass : 6 Switches, 3 States (ON/SEQUENCE/OFF)
Phase indicators: 3 LEDs, one per phase X, Y, and Z120 amp 120 volt AC sequenced distro and controller
• Six Independent 20 amp circuits @ 120V - 120 amp total load capacity
• Six delay banks with rear panel NEMA 5-20R duplex outlets and optically
isolated DC relay outlets
• Front panel status power LED, Bypass Switch and Circuit Breaker for each
Delay Bank
• 120A power distribution block accommodates 120V/240V single phase, or
120/208-Y three phase power
• X Y Z Status LED confidence indicators for each Input Phase
• Sequence unit ON or OFF from front panel or by remote switch
• Independent three position switches to power sequence (SEQ) or Bypassed ON
or OFF each Bank
• Adjustable Delay with up to 7 Minute Interval between Banks, Total maximum
Sequence Time 35 minutes
• Remote interface with an isolated 12VDC, 250mA power source for external
secondary applications
• Signal level relay contacts (NO or NC) used to control and sequence other units
• Front panel key switch and anti-tamper DIP cover for added security
• Force Off emergency shutdown
• Rugged two rack space (2RU) chassisControl/Status/Triggering (Rear Panel)
Remote Terminal: Phoenix-type 4 Pin Connector w/Screw
Terminals;
+12V @ 250mA, STAT, REM, GND (Class 2 wiring)
+5 to 30VDC at REM input terminal.
Delay Outputs: Phoenix-type 8-Pin Connector with Screw
Terminals
6 relay contacts with NO and NC common connections
(Class 2 wiring)
A, B, C, D, E, and F relay contacts switched with output circuits,
1A@48VDC
Force Off: Phoenix-type 2 Pin Connector with Screw Terminals;
Optically isolated, 12V, 10mA current source
(Class 2 wiring)
Senses external relay contact closure
Power Consumption
Standby: 5 Watts
Sequenced ON: 20 Watts
Specifications are subject to change without notice due to design improvements and upgrades.
Safety Agency
NTRL-C, RoHS CompliantASD-120 2.0 / 19” L x 10” D x 3.5” H 16 lbs. 22”L x 18.5”D x 8”H / 18 lbs.
|
Video |
| Payment Information & Processing Time |
|
ITEM WILL BE SHIPPED WITHIN TWO
|