Back to the main page Back to category Cables Snakes and Interconnects
musical instrument details
Signex Isopatch Bantam - CPT96 TT-phone
Estimated price for orientation: 389 $
Category: Cables Snakes and Interconnects
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Marke: Signex Anschlüsse B: 3,5 mm Buchse
Artikel ist absolut NEU. Mit 3 Jahren Reverse Pro-Store Garantie* Versandkosten:
Für Preisanfragen und Rabatte bitte Mail an info@reverse-records.deAchtung !!!
Lötversionen sind Bestellware und brauchen 14 Tage Extra Lieferzeit!The Signex
Isopatch Bantam is based on the same design that has made the Isopatch so
popular,
but uses the 4.4mm 'Bantam' Jack widely accepted in professional
studios.
The Bantam Jack, designed and built to withstand the heavy duty use
encountered in a professional environment,
offers superior contact performance
in a much smaller space.
The twin
Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to
keep
out the contaminants that shorten contact life, with spacing to accept
twin 'stereo' plugs.
Contacts are silver or gold plated phosphor-bronze with
optional solid palladium switch contacts.
All
components are mounted on two horizontal printed circuit boards (PCBs) which
makes the Isopatch Bantam very solid and gives full access to most of the
circuitry including parallel points and the
special 'program pads' for
normalising.
The use of flexible jumper cables between top and bottom PCBs
means that the Isopatch Bantam
can be opened up for servicing if needed.
Unlike
conventional patch panels, the Isopatch offers half or full normalising on
every channel by simply
soldering across special 'program pads' on the top PCB
- No need for tedious hard-wiring.
In fact, if the Isopatch Bantam is already
installed, you don't even have to unplug the rear connectors.
The redesigned
PCB now offers
25 way D-sub connectors wired to the Tascam 38/88 pattern, so
that wiring looms can be made up separately,
then just plugged in on site.
Alternatively,
direct solder versions are available with on board cable-tie points for every
channel.
The Isopatch can be used for most types of audio signal including
mono, stereo, balanced and unbalanced lines.
It can also be used for mixer
insert points without the need for special 'splitter' leads
Features
* Two rows of 48 Bantam Jacks in 1U of rack
space
* Enclosed Jack design keeps out dust and
dirt
* Direct solder or 25 way D-sub rear
termination
* Half and full normalling available on all
channels
* Suitable for balanced/unbalanced and
stereo signals
* Lacing Bar Kit available for extra rear
cable support
* Neat slide-in strips for socket
designation
* Suitable for insert points without
special leads
* Gold and palladium contact versions also
available
* PCB parallel wiring points for every Jack
Specifications:
Front sockets
* 4.4mm
Bantam Jack sockets
Rear termination<
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Marke: | Signex |
| Anschlüsse B: | 3,5 mm Buchse |
Artikel ist absolut NEU. Mit 3 Jahren Reverse Pro-Store Garantie*
Versandkosten:
Für Preisanfragen und Rabatte bitte Mail an info@reverse-records.deAchtung !!!
Lötversionen sind Bestellware und brauchen 14 Tage Extra Lieferzeit!The Signex Isopatch Bantam is based on the same design that has made the Isopatch so popular,
but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios.
The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment,
offers superior contact performance in a much smaller space. The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep
out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs.
Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts. All components are mounted on two horizontal printed circuit boards (PCBs) which makes the Isopatch Bantam very solid and gives full access to most of the circuitry including parallel points and the
special 'program pads' for normalising.
The use of flexible jumper cables between top and bottom PCBs means that the Isopatch Bantam
can be opened up for servicing if needed. Unlike conventional patch panels, the Isopatch offers half or full normalising on every channel by simply
soldering across special 'program pads' on the top PCB - No need for tedious hard-wiring.
In fact, if the Isopatch Bantam is already installed, you don't even have to unplug the rear connectors.
The redesigned PCB now offers
25 way D-sub connectors wired to the Tascam 38/88 pattern, so that wiring looms can be made up separately,
then just plugged in on site. Alternatively, direct solder versions are available with on board cable-tie points for every channel.
The Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines.
It can also be used for mixer insert points without the need for special 'splitter' leads Features * Two rows of 48 Bantam Jacks in 1U of rack space * Enclosed Jack design keeps out dust and dirt * Direct solder or 25 way D-sub rear termination * Half and full normalling available on all channels * Suitable for balanced/unbalanced and stereo signals * Lacing Bar Kit available for extra rear cable support * Neat slide-in strips for socket designation * Suitable for insert points without special leads * Gold and palladium contact versions also available * PCB parallel wiring points for every Jack Specifications: Front sockets * 4.4mm Bantam Jack sockets Rear termination<
Für Preisanfragen und Rabatte bitte Mail an info@reverse-records.deAchtung !!!
Lötversionen sind Bestellware und brauchen 14 Tage Extra Lieferzeit!The Signex Isopatch Bantam is based on the same design that has made the Isopatch so popular,
but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios.
The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment,
offers superior contact performance in a much smaller space. The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep
out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs.
Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts. All components are mounted on two horizontal printed circuit boards (PCBs) which makes the Isopatch Bantam very solid and gives full access to most of the circuitry including parallel points and the
special 'program pads' for normalising.
The use of flexible jumper cables between top and bottom PCBs means that the Isopatch Bantam
can be opened up for servicing if needed. Unlike conventional patch panels, the Isopatch offers half or full normalising on every channel by simply
soldering across special 'program pads' on the top PCB - No need for tedious hard-wiring.
In fact, if the Isopatch Bantam is already installed, you don't even have to unplug the rear connectors.
The redesigned PCB now offers
25 way D-sub connectors wired to the Tascam 38/88 pattern, so that wiring looms can be made up separately,
then just plugged in on site. Alternatively, direct solder versions are available with on board cable-tie points for every channel.
The Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines.
It can also be used for mixer insert points without the need for special 'splitter' leads Features * Two rows of 48 Bantam Jacks in 1U of rack space * Enclosed Jack design keeps out dust and dirt * Direct solder or 25 way D-sub rear termination * Half and full normalling available on all channels * Suitable for balanced/unbalanced and stereo signals * Lacing Bar Kit available for extra rear cable support * Neat slide-in strips for socket designation * Suitable for insert points without special leads * Gold and palladium contact versions also available * PCB parallel wiring points for every Jack Specifications: Front sockets * 4.4mm Bantam Jack sockets Rear termination<