Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Joemeek OneQ Mic Pre/EQ/Optical Comp/DeEsser/Enhancer & RODE NT2-A Condenser Mic
Estimated price for orientation: 890 $
Category: Preamps and Channel Strips
Class:
Description Type: Vintage Enhancer Brand: Joemeek UPC: 850207000460
Excellent Condition. Barely used. This is everything you need, simply plug in and play!- Joemeek OneQ Mic Pre/EQ/Optical Comp/DeEsser/Enhancer. Joemeek's most advanced, full-featured channel strip. The OneQ is the most full-featured, technologically advanced studio channel Joemeek has ever made! The Joemeek OneQ is a single-channel combining Mic Pre (with Burr-Brown IC), four-band EQ”the most flexible yet”Joemeek's "signature" optical compressor, a De-Esser, and an Enhancer. It's a master channel like no other. Housed in a 2u chassis, the elegantly sculpted face plate is intelligently laid out, with clear, easy to read legends and a large analog VU meter. The OneQ also features 24-bit/96kHz A/D converters with word clock input and output. SPECIFICATIONS Input impedances: Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 10dB to 60dB (variable)
Common mode rejection: 70dB
Equivalent input noise: 128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 15Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +21dBu; Line: +45dBu
Headroom before clipping: +21dBu
Compressor threshold: infinity dBu to -20dBu (variable)
Compressor ratio: 1:1 to 10:1 (variable)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
Nominal output levels: +4dBu/-10dBv
Output impedance: 100ohm
Output Level switch: 12dB attenuation
Noise Floor: 85dBu (typical, with 40dB mic gain)
VU Meter: Analogue movement
Power supply: 115V / 230V ac mains, 50/60Hz
Power consumption: 30W
Mechanical: 482W x 88H x 220D (overall)
Weight: 3 kilos
High Pass Filter: 12dB per octave cut below 80Hz
EQ Boost & Cut:+/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz/120Hz switchable
LMF Frequency: 200Hz to 2kHz variable
HMF Frequency: 1kHz to 6kHz variable
HF Frequency: 7kHz/14kHz (selectable)
EQ "Q": 0.9 (1.6 octaves)Digital Output Specifications
Sampling: 24 Bit
Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical
External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronizing)- RODE NT2-A Condenser MicrophoneThe NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.- 2 x 3 pin male / female condenser Microphone cables.
Description
| Type: | Vintage Enhancer | Brand: | Joemeek |
| UPC: | 850207000460 |
Excellent Condition. Barely used. This is everything you need, simply plug in and play!- Joemeek OneQ Mic Pre/EQ/Optical Comp/DeEsser/Enhancer. SPECIFICATIONS Input impedances: Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 10dB to 60dB (variable)
Common mode rejection: 70dB
Equivalent input noise: 128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 15Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +21dBu; Line: +45dBu
Headroom before clipping: +21dBu
Compressor threshold: infinity dBu to -20dBu (variable)
Compressor ratio: 1:1 to 10:1 (variable)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
Nominal output levels: +4dBu/-10dBv
Output impedance: 100ohm
Output Level switch: 12dB attenuation
Noise Floor: 85dBu (typical, with 40dB mic gain)
VU Meter: Analogue movement
Power supply: 115V / 230V ac mains, 50/60Hz
Power consumption: 30W
Mechanical: 482W x 88H x 220D (overall)
Weight: 3 kilos
High Pass Filter: 12dB per octave cut below 80Hz
EQ Boost & Cut:+/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz/120Hz switchable
LMF Frequency: 200Hz to 2kHz variable
HMF Frequency: 1kHz to 6kHz variable
HF Frequency: 7kHz/14kHz (selectable)
EQ "Q": 0.9 (1.6 octaves)Digital Output Specifications
Sampling: 24 Bit
Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical
External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronizing)- RODE NT2-A Condenser MicrophoneThe NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.- 2 x 3 pin male / female condenser Microphone cables.
Joemeek's most advanced, full-featured channel strip. The OneQ is the most full-featured, technologically advanced studio channel Joemeek has ever made! The Joemeek OneQ is a single-channel combining Mic Pre (with Burr-Brown IC), four-band EQ”the most flexible yet”Joemeek's "signature" optical compressor, a De-Esser, and an Enhancer. It's a master channel like no other. Housed in a 2u chassis, the elegantly sculpted face plate is intelligently laid out, with clear, easy to read legends and a large analog VU meter. The OneQ also features 24-bit/96kHz A/D converters with word clock input and output.
Pre-amp overall gain: 10dB to 60dB (variable)
Common mode rejection: 70dB
Equivalent input noise: 128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 15Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +21dBu; Line: +45dBu
Headroom before clipping: +21dBu
Compressor threshold: infinity dBu to -20dBu (variable)
Compressor ratio: 1:1 to 10:1 (variable)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
Nominal output levels: +4dBu/-10dBv
Output impedance: 100ohm
Output Level switch: 12dB attenuation
Noise Floor: 85dBu (typical, with 40dB mic gain)
VU Meter: Analogue movement
Power supply: 115V / 230V ac mains, 50/60Hz
Power consumption: 30W
Mechanical: 482W x 88H x 220D (overall)
Weight: 3 kilos
High Pass Filter: 12dB per octave cut below 80Hz
EQ Boost & Cut:+/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz/120Hz switchable
LMF Frequency: 200Hz to 2kHz variable
HMF Frequency: 1kHz to 6kHz variable
HF Frequency: 7kHz/14kHz (selectable)
EQ "Q": 0.9 (1.6 octaves)Digital Output Specifications
Sampling: 24 Bit
Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical
External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronizing)- RODE NT2-A Condenser MicrophoneThe NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.- 2 x 3 pin male / female condenser Microphone cables.