Back to the main page Back to category Amplifiers
musical instrument details
Vox AC30H2L With Road Case
Estimated price for orientation: 2 000 $
Category: Amplifiers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Vox
Vox AC30. 50th Anniversary Heritage Edition for sale. Only 500 built.
Custom built case from Brady Cases is included, has compartment on top that you can put loom, straps, extra pedals, etc.
Recently had all new tubes put in.
Email if interested.
Thanks,
Jeff
Description below.
Channel 1 is the EF86 Preamp channel, and features two inputs wired in the traditional way providing a 6dB gain difference between them. A two-position BASS SHIFT switch is included, with position 1 voiced to the original vintage-correct bass response and position 2 voiced to tighten the bass response and reduce any muddiness during high volume use. The three-position BRILLIANCE SWITCH provides flat response when in the OFF position. Position 1 is a new position voiced like the early "AC30 Treble" amps, while position 2 is the original brilliance circuit, which acts as a dramatic bass cut. The EF86 Mode switch re-configures the EF86 valve from Pentode mode to Triode mode. Triode mode will give a lower gain tone with higher headroom. Pentode mode is the famed original mode and has a very sweet high gain tone with less headroom.
Channel 2 is the Top Boost Preamp channel. Like Channel 1, this channel includes two inputs wired with a 6dB gain difference between them. The Treble and Bass controls are from the 1963 Top Boost circuit and are extremely interactive. Very minor adjustments of these controls can yield dramatic changes in tone colour. And true to VOX form is the Top Cut control, which cuts high from either channel end as it's turned up.
Flexible power. The O/P Switch adds even more flexibility to the AC30 Heritage. This switch changes the power output valves from Pentode Mode, which is the normal operating mode of the power amplifier, to Triode Mode which halves the power output to 15 watts and at the same time offering smoother tonal characteristics.
VOX AC30H2L Specificaitons
Power Output: 30 Watts RMS into 8 or 16 ohm loudspeaker load--selectable via rear panel switch.
Valve complement: 1 x EF86, 3 x ECC83/12AX7, 4 x EL84, 1 x GZ34 (rectifier).
Loudspeaker: Where fitted, is 2 x 8 ohm VOX/Celestion Alnico Blue loudspeaker wired in series for 16 Ohms.
Dimensions & Weights:
AC30H2L
Dimensions (W x H x D): 695 x 564 x 260 mm / 27.4 x 22.2 x 10.2 inches
Weight: 34.5 kg / 76.1 lbs.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Vox |
Vox AC30. 50th Anniversary Heritage Edition for sale. Only 500 built.
Custom built case from Brady Cases is included, has compartment on top that you can put loom, straps, extra pedals, etc.
Recently had all new tubes put in.
Email if interested.
Thanks,
Jeff
Description below.
Channel 1 is the EF86 Preamp channel, and features two inputs wired in the traditional way providing a 6dB gain difference between them. A two-position BASS SHIFT switch is included, with position 1 voiced to the original vintage-correct bass response and position 2 voiced to tighten the bass response and reduce any muddiness during high volume use. The three-position BRILLIANCE SWITCH provides flat response when in the OFF position. Position 1 is a new position voiced like the early "AC30 Treble" amps, while position 2 is the original brilliance circuit, which acts as a dramatic bass cut. The EF86 Mode switch re-configures the EF86 valve from Pentode mode to Triode mode. Triode mode will give a lower gain tone with higher headroom. Pentode mode is the famed original mode and has a very sweet high gain tone with less headroom.
Channel 2 is the Top Boost Preamp channel. Like Channel 1, this channel includes two inputs wired with a 6dB gain difference between them. The Treble and Bass controls are from the 1963 Top Boost circuit and are extremely interactive. Very minor adjustments of these controls can yield dramatic changes in tone colour. And true to VOX form is the Top Cut control, which cuts high from either channel end as it's turned up.
Flexible power. The O/P Switch adds even more flexibility to the AC30 Heritage. This switch changes the power output valves from Pentode Mode, which is the normal operating mode of the power amplifier, to Triode Mode which halves the power output to 15 watts and at the same time offering smoother tonal characteristics.
VOX AC30H2L Specificaitons
Power Output: 30 Watts RMS into 8 or 16 ohm loudspeaker load--selectable via rear panel switch.
Valve complement: 1 x EF86, 3 x ECC83/12AX7, 4 x EL84, 1 x GZ34 (rectifier).
Loudspeaker: Where fitted, is 2 x 8 ohm VOX/Celestion Alnico Blue loudspeaker wired in series for 16 Ohms.
Dimensions & Weights:
AC30H2L
Dimensions (W x H x D): 695 x 564 x 260 mm / 27.4 x 22.2 x 10.2 inches
Weight: 34.5 kg / 76.1 lbs.