Back to the main page Back to category Microphones and Wireless Systems
musical instrument details
Lectrosonics UCR411A UM400 Wireless Microphone System - Block 27
Estimated price for orientation: 1 350 $
Category: Microphones and Wireless Systems
Class:
Description Brand: Lectrosonics Features: Adjustable Gain, Auto-Lock Function, Back-Lit LCD Display, Bodypack Transmitter Type: Wireless Bundled Items: Body Transmitter Model: UCR 411a / UM400 To Fit: Wireless Systems Connectivity: Wired XLR Country/Region of Manufacture: United States Connector(s): XLR 3 Pin Design: Clip-On Wireless Technology: UHF
Both units recently inspected and serviced
to Lectrosonics specifications. Just walked tested and performed to factory
specs.
Purchase Includes:
1 - UM400 Digital Hybrid Wireless®
Compact Transmitter
1 - Antenna - Cut for block (Part #AMMXX)
1 - Adjustment Tool
1 - UCR411a Digital Hybrid Wireless®
Compact Receiver
2 - Antenna (Part #A8UXX)
1 - Power Supply/AC Adapter (Part
#CH12)
UM400 Digital Hybrid Wireless® UHF
Belt-Pack Transmitter - Block 27 (Lavender 691.200 -
716.700 MHz*)
256 synthesized UHF frequencies
100 mW output power
DSP controlled dual envelope input limiter
DSP emulations for analog compatibility
Servo bias input preamp
DSP based pilot-tone signal
Circulator/Isolator output stage
Adjustable low frequency roll-off
The UM400 implements the latest Digital Hybrid
Wireless® technology
in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides
taps for low impedance dynamic mics, electret lavalier mics with positive or
negative bias and line level inputs. Input gain is adjustable over a 43 dB
range to perfectly match the audio input level for optimum modulation, minimum
distortion and maximum signal to noise ratio. Input levels are accurately
indicated by two LEDs on the control panel.The innovative servo bias input on the standard 5-pin connector provides a
programmable, regulated voltage to accommodate a wide variety of electret
microphones. This is a used item in good condition which meets factory specs
with professional engraving – “sold as is” not for use in North America*.
256 synthesized UHF frequencies 100 mW
output power DSP controlled dual envelope input limiter DSP emulations for
analog compatibility Servo bias input preamp DSP based pilot-tone signal
Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a
implements the latest Digital Hybrid Wireless® technology in a classic
Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low
impedance dynamic mics, electret lavalier mics with positive or negative bias
and line level inputs. Input gain is adjustable over a 43 dB range to perfectly
match the audio input level for optimum modulation, minimum distortion and
maximum signal to noise ratio. Input levels are accurately indicated by two
LEDs on the control panel. The innovative servo bias input on the
standard 5-pin connector provides a programmable, regulated voltage to
accommodate a wide variety of electret microphones. This is a used item in good
condition which meets factory specs with professional engraving – “sold as is”.
UCR411a Digital Hybrid Wireless® Compact Receiver - Block 27 (Lavender 691.200 - 716.700 MHz*)
Digital Hybrid Wireless® (U.S. Patent
#7,225,135)
SmartSquelch™
SmartDiversity™
256 selectable UHF frequencies
Auto-tracking front-end filters
DSP-based pilot tone
Graphics type backlit LCD display
Balanced XLR audio output
Internal batteries or external DC powering options
Compatibility modes for use with analog transmitters
The UCR411A receiver provides
professional performance and a versatile feature set in a compact design for
field and location production. All settings are made from the front panel with
a powerful LCD interface, making the unit ideal for use in Quad Packs, on sound
carts, in portable bags and in rack mount multi-couplers. To alleviate
interference problems in an increasingly congested RF spectrum, an RF spectrum
analyzer is built into the receiver. The receiver tunes across its 25.6 MHz
tuning range and records RF activity with markers on the LCD screen. Finding
clear operating frequencies is a quick, simple process. The UCR411A is
compatible with all 400 Series Lectrosonics wireless transmitters (and some
other transmitter types)
Description
| Brand: | Lectrosonics | Features: | Adjustable Gain, Auto-Lock Function, Back-Lit LCD Display, Bodypack Transmitter |
| Type: | Wireless | Bundled Items: | Body Transmitter |
| Model: | UCR 411a / UM400 | To Fit: | Wireless Systems |
| Connectivity: | Wired XLR | Country/Region of Manufacture: | United States |
| Connector(s): | XLR 3 Pin | Design: | Clip-On |
| Wireless Technology: | UHF |
Both units recently inspected and serviced
to Lectrosonics specifications. Just walked tested and performed to factory
specs.
Purchase Includes:
1 - UM400 Digital Hybrid Wireless®
Compact Transmitter
1 - Antenna - Cut for block (Part #AMMXX)
1 - Adjustment Tool
1 - UCR411a Digital Hybrid Wireless®
Compact Receiver
2 - Antenna (Part #A8UXX)
1 - Power Supply/AC Adapter (Part
#CH12)
UM400 Digital Hybrid Wireless® UHF
Belt-Pack Transmitter - Block 27 (Lavender 691.200 -
716.700 MHz*)
256 synthesized UHF frequencies
100 mW output power
DSP controlled dual envelope input limiter
DSP emulations for analog compatibility
Servo bias input preamp
DSP based pilot-tone signal
Circulator/Isolator output stage
Adjustable low frequency roll-off
The UM400 implements the latest Digital Hybrid
Wireless® technology
in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides
taps for low impedance dynamic mics, electret lavalier mics with positive or
negative bias and line level inputs. Input gain is adjustable over a 43 dB
range to perfectly match the audio input level for optimum modulation, minimum
distortion and maximum signal to noise ratio. Input levels are accurately
indicated by two LEDs on the control panel.The innovative servo bias input on the standard 5-pin connector provides a
programmable, regulated voltage to accommodate a wide variety of electret
microphones. This is a used item in good condition which meets factory specs
with professional engraving – “sold as is” not for use in North America*.
256 synthesized UHF frequencies 100 mW
output power DSP controlled dual envelope input limiter DSP emulations for
analog compatibility Servo bias input preamp DSP based pilot-tone signal
Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a
implements the latest Digital Hybrid Wireless® technology in a classic
Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low
impedance dynamic mics, electret lavalier mics with positive or negative bias
and line level inputs. Input gain is adjustable over a 43 dB range to perfectly
match the audio input level for optimum modulation, minimum distortion and
maximum signal to noise ratio. Input levels are accurately indicated by two
LEDs on the control panel. The innovative servo bias input on the
standard 5-pin connector provides a programmable, regulated voltage to
accommodate a wide variety of electret microphones. This is a used item in good
condition which meets factory specs with professional engraving – “sold as is”.
UCR411a Digital Hybrid Wireless® Compact Receiver - Block 27 (Lavender 691.200 - 716.700 MHz*)
Digital Hybrid Wireless® (U.S. Patent
#7,225,135)
SmartSquelch™
SmartDiversity™
256 selectable UHF frequencies
Auto-tracking front-end filters
DSP-based pilot tone
Graphics type backlit LCD display
Balanced XLR audio output
Internal batteries or external DC powering options
Compatibility modes for use with analog transmitters
The UCR411A receiver provides
professional performance and a versatile feature set in a compact design for
field and location production. All settings are made from the front panel with
a powerful LCD interface, making the unit ideal for use in Quad Packs, on sound
carts, in portable bags and in rack mount multi-couplers. To alleviate
interference problems in an increasingly congested RF spectrum, an RF spectrum
analyzer is built into the receiver. The receiver tunes across its 25.6 MHz
tuning range and records RF activity with markers on the LCD screen. Finding
clear operating frequencies is a quick, simple process. The UCR411A is
compatible with all 400 Series Lectrosonics wireless transmitters (and some
other transmitter types)