Back to the main page Back to category Vintage Pro Audio Equipment
musical instrument details
ADR F769X-R Vocal Stresser, Full Recap / Refurb, XLNT Cond, Looks/Sounds Great!
Estimated price for orientation: 2 850 $
Category: Vintage Pro Audio Equipment
Class:
Description
Here's a very nice ADR F769X-R Vocal Stresser. It's been fully recapped, refurbished, calibrated, and tested. It looks and sounds great, and has excellent cosmetics.There were several models within this range made by ADR and the differences can be confusing. The F769X-R Vocal Stresser has a 4-band cut/boost equalizer section and a "Compex" section that includes a limiter, compressor, gate, and expander. By using the mode switch in the center of the unit the EQ can be inserted before the Compex section, or after it, or it can be used separately, via a second set of XLR connectors on the rear panel.The EQ section allows 20 db of cut or boost in each band, selectable between Dip and Peak. The Compex section uses a low distortion FET, with a great deal of parametric control. The Threshold, Ratio, and Release controls are all stepped attenuators, allowing precise set up and repeatability.An owner's manual and North America type power cord are unclided.SPECIFICATIONS
Inputs: 2 XLR inputs, unbalanced, 10K impedance.
Outputs: 2 XLR outputs, unbalanced, 150 ohms impedance.
Maximum gain: approx 34 db. Maximum output level: 18 dbu.
Distortion: Less than .1% with compressor at +10 db threshold
Frequency response: 30 Hz to 20 kHz + 0 db, -.5 db
AC power input: 50/60 Hz, 115/230 VAC (selected via a slide switch on the rear panel)This model is very highly regarded in the pro audio community and this example is in great condition. Thanks for looking and please contact us with any questions.Studio Electronics, Inc. has served the pro audio industry since 1981. We run one of the best equipped service repair shops in North America, with a vast parts inventory and an extensive library of documentation on all types of audio gear -- from the 1950’s to present day. We are an authorized service center for several manufacturers, and offer expert service on all kinds of vintage pro audio gear including EMT, UREI, Pultec, Eventide, API, Neve, and many others. We’ve installed over 250 studios -- everything from small project studios to large scale projects for firms like Warner Brothers and Disney. We’re proud of our reputation in the pro audio community. You can get more info about us by visiting our site, www.studioelectronics.biz.
Description
Here's a very nice ADR F769X-R Vocal Stresser. It's been fully recapped, refurbished, calibrated, and tested. It looks and sounds great, and has excellent cosmetics.There were several models within this range made by ADR and the differences can be confusing. The F769X-R Vocal Stresser has a 4-band cut/boost equalizer section and a "Compex" section that includes a limiter, compressor, gate, and expander. By using the mode switch in the center of the unit the EQ can be inserted before the Compex section, or after it, or it can be used separately, via a second set of XLR connectors on the rear panel.The EQ section allows 20 db of cut or boost in each band, selectable between Dip and Peak. The Compex section uses a low distortion FET, with a great deal of parametric control. The Threshold, Ratio, and Release controls are all stepped attenuators, allowing precise set up and repeatability.An owner's manual and North America type power cord are unclided.SPECIFICATIONS
Inputs: 2 XLR inputs, unbalanced, 10K impedance.
Outputs: 2 XLR outputs, unbalanced, 150 ohms impedance.
Maximum gain: approx 34 db. Maximum output level: 18 dbu.
Distortion: Less than .1% with compressor at +10 db threshold
Frequency response: 30 Hz to 20 kHz + 0 db, -.5 db
AC power input: 50/60 Hz, 115/230 VAC (selected via a slide switch on the rear panel)This model is very highly regarded in the pro audio community and this example is in great condition. Thanks for looking and please contact us with any questions.Studio Electronics, Inc. has served the pro audio industry since 1981. We run one of the best equipped service repair shops in North America, with a vast parts inventory and an extensive library of documentation on all types of audio gear -- from the 1950’s to present day. We are an authorized service center for several manufacturers, and offer expert service on all kinds of vintage pro audio gear including EMT, UREI, Pultec, Eventide, API, Neve, and many others. We’ve installed over 250 studios -- everything from small project studios to large scale projects for firms like Warner Brothers and Disney. We’re proud of our reputation in the pro audio community. You can get more info about us by visiting our site, www.studioelectronics.biz.
Inputs: 2 XLR inputs, unbalanced, 10K impedance.
Outputs: 2 XLR outputs, unbalanced, 150 ohms impedance.
Maximum gain: approx 34 db. Maximum output level: 18 dbu.
Distortion: Less than .1% with compressor at +10 db threshold
Frequency response: 30 Hz to 20 kHz + 0 db, -.5 db
AC power input: 50/60 Hz, 115/230 VAC (selected via a slide switch on the rear panel)This model is very highly regarded in the pro audio community and this example is in great condition. Thanks for looking and please contact us with any questions.Studio Electronics, Inc. has served the pro audio industry since 1981. We run one of the best equipped service repair shops in North America, with a vast parts inventory and an extensive library of documentation on all types of audio gear -- from the 1950’s to present day. We are an authorized service center for several manufacturers, and offer expert service on all kinds of vintage pro audio gear including EMT, UREI, Pultec, Eventide, API, Neve, and many others. We’ve installed over 250 studios -- everything from small project studios to large scale projects for firms like Warner Brothers and Disney. We’re proud of our reputation in the pro audio community. You can get more info about us by visiting our site, www.studioelectronics.biz.