Back to the main page Back to category Lautsprecher and Monitore
musical instrument details
QUESTED VS3208 Selfpowered (active) Midfield Studio Monitors (pair)
Estimated price for orientation: 3 099 $
Category: Lautsprecher and Monitore
Class:
Description
You are bidding on a pair of Quested VS3208, only used in smoke-free studio environment, in Germany, 12159 BERLIN.
They are about 8 years old and still in very good technical and optical shape.- - - MAKE OFFER!!!! - - - I can ship them but it might be expensive (up to EUR 350,-)
You may better pick them up in Berlin City. (each is about 50 kilo)- - - SHIPPING (EU ONLY) - - - The Original packaging is available and will be used for shipping.
For shipping cost please "ask seller question" and tell me your country and full adress, and I will respond with a quote.For details please call: 0049-30-74781432 (also leave a message when you dont reach me)You will get an invoice with 19% Tax (included the buying price).Here are some more details for those who dont know these speakers:Applications: Studio monitor Key Features:
Three-way midfield powered monitors;
dual 8-inch woofers;
3-inch
midrange,
1.25-inch tweeter;
230 W LF, 110 W MF, 100 W HF amplifiersThis is a big, heavy speaker. Each monitor weighs 104 pounds and
measures 19 inches wide, 24.25 inches high and 16.5 inches deep. Cabinet
construction is rock solid.Two 8-inch diameter ported woofers, a
3-inch soft-dome midrange and a 1.25-inch soft-dome tweeter are located
on the front. Crossover frequencies are 450 Hz and 4500 Hz, 24
dB/octave. Each driver is housed in its own chamber. Since the tweeter
and midrange domes are not physically protected, care must be taken
during installation. An LED glows green when the power is on, flashes
red 0.5 dB below signal clipping, and glows red if the amp overheats and
is muted.A large, three-channel amplifier with heat sinking and
an on/off switch is on the back of the cabinet. It works on 230 V or
115 V. Total power is 400 W continuous. A temperature monitor shuts off
the amp if it overheats and automatically turns it back on when the
temperature is safe.An optional kit lets the user remove the
electronics and mount them away from the speakers - permitting the
VS3208 to be mounted in soffits where no cooling is available. Also
optional is the VS1115 subwoofer, which extends the response down to 15
Hz. Magnetic shielding is another option. Also available is a pair of
38-inch tall steel speaker stands ($290 each) that place the speakers at
the optimum height for most applications.Three easy-access
toggle switches are used to contour the LF, mids and HF. Input is via a
3-pin XLR-type connector, which works with balanced or unbalanced
signals. A trim pot adjusts the monitor's sensitivity over an 18 dB
range in 2 dB steps.According to the user manual, maximum SPL is
112 dB C-weighted at 1 meter. Frequency response is reported to be 40
Hz to 18 kHz +/- 2 dB. Sensitivity is adjustable between + 4 dBu and -14
dBu for 100 dB SPL at 1 meter. Amplifier continuous power is 230 W LF,
110 W MF, and 100 W HF. Claimed THD is less than 0.03 percent up to 1 dB
below clipping, while hum and noise are at least 100 dB below the
clipping level.The user manual covers, positioning, connections,
controls, specs, accessories and driver replacement. List price is
$7,400 per pair with a five-year guarantee.
Description
You are bidding on a pair of Quested VS3208, only used in smoke-free studio environment, in Germany, 12159 BERLIN.
They are about 8 years old and still in very good technical and optical shape.- - - MAKE OFFER!!!! - - - I can ship them but it might be expensive (up to EUR 350,-)
You may better pick them up in Berlin City. (each is about 50 kilo)- - - SHIPPING (EU ONLY) - - - The Original packaging is available and will be used for shipping.
For shipping cost please "ask seller question" and tell me your country and full adress, and I will respond with a quote.For details please call: 0049-30-74781432 (also leave a message when you dont reach me)You will get an invoice with 19% Tax (included the buying price).Here are some more details for those who dont know these speakers:Applications: Studio monitor Key Features: Three-way midfield powered monitors;
dual 8-inch woofers;
3-inch midrange,
1.25-inch tweeter;
230 W LF, 110 W MF, 100 W HF amplifiersThis is a big, heavy speaker. Each monitor weighs 104 pounds and measures 19 inches wide, 24.25 inches high and 16.5 inches deep. Cabinet construction is rock solid.Two 8-inch diameter ported woofers, a 3-inch soft-dome midrange and a 1.25-inch soft-dome tweeter are located on the front. Crossover frequencies are 450 Hz and 4500 Hz, 24 dB/octave. Each driver is housed in its own chamber. Since the tweeter and midrange domes are not physically protected, care must be taken during installation. An LED glows green when the power is on, flashes red 0.5 dB below signal clipping, and glows red if the amp overheats and is muted.A large, three-channel amplifier with heat sinking and an on/off switch is on the back of the cabinet. It works on 230 V or 115 V. Total power is 400 W continuous. A temperature monitor shuts off the amp if it overheats and automatically turns it back on when the temperature is safe.An optional kit lets the user remove the electronics and mount them away from the speakers - permitting the VS3208 to be mounted in soffits where no cooling is available. Also optional is the VS1115 subwoofer, which extends the response down to 15 Hz. Magnetic shielding is another option. Also available is a pair of 38-inch tall steel speaker stands ($290 each) that place the speakers at the optimum height for most applications.Three easy-access toggle switches are used to contour the LF, mids and HF. Input is via a 3-pin XLR-type connector, which works with balanced or unbalanced signals. A trim pot adjusts the monitor's sensitivity over an 18 dB range in 2 dB steps.According to the user manual, maximum SPL is 112 dB C-weighted at 1 meter. Frequency response is reported to be 40 Hz to 18 kHz +/- 2 dB. Sensitivity is adjustable between + 4 dBu and -14 dBu for 100 dB SPL at 1 meter. Amplifier continuous power is 230 W LF, 110 W MF, and 100 W HF. Claimed THD is less than 0.03 percent up to 1 dB below clipping, while hum and noise are at least 100 dB below the clipping level.The user manual covers, positioning, connections, controls, specs, accessories and driver replacement. List price is $7,400 per pair with a five-year guarantee.
They are about 8 years old and still in very good technical and optical shape.- - - MAKE OFFER!!!! - - - I can ship them but it might be expensive (up to EUR 350,-)
You may better pick them up in Berlin City. (each is about 50 kilo)- - - SHIPPING (EU ONLY) - - - The Original packaging is available and will be used for shipping.
For shipping cost please "ask seller question" and tell me your country and full adress, and I will respond with a quote.For details please call: 0049-30-74781432 (also leave a message when you dont reach me)You will get an invoice with 19% Tax (included the buying price).Here are some more details for those who dont know these speakers:Applications: Studio monitor Key Features: Three-way midfield powered monitors;
dual 8-inch woofers;
3-inch midrange,
1.25-inch tweeter;
230 W LF, 110 W MF, 100 W HF amplifiersThis is a big, heavy speaker. Each monitor weighs 104 pounds and measures 19 inches wide, 24.25 inches high and 16.5 inches deep. Cabinet construction is rock solid.Two 8-inch diameter ported woofers, a 3-inch soft-dome midrange and a 1.25-inch soft-dome tweeter are located on the front. Crossover frequencies are 450 Hz and 4500 Hz, 24 dB/octave. Each driver is housed in its own chamber. Since the tweeter and midrange domes are not physically protected, care must be taken during installation. An LED glows green when the power is on, flashes red 0.5 dB below signal clipping, and glows red if the amp overheats and is muted.A large, three-channel amplifier with heat sinking and an on/off switch is on the back of the cabinet. It works on 230 V or 115 V. Total power is 400 W continuous. A temperature monitor shuts off the amp if it overheats and automatically turns it back on when the temperature is safe.An optional kit lets the user remove the electronics and mount them away from the speakers - permitting the VS3208 to be mounted in soffits where no cooling is available. Also optional is the VS1115 subwoofer, which extends the response down to 15 Hz. Magnetic shielding is another option. Also available is a pair of 38-inch tall steel speaker stands ($290 each) that place the speakers at the optimum height for most applications.Three easy-access toggle switches are used to contour the LF, mids and HF. Input is via a 3-pin XLR-type connector, which works with balanced or unbalanced signals. A trim pot adjusts the monitor's sensitivity over an 18 dB range in 2 dB steps.According to the user manual, maximum SPL is 112 dB C-weighted at 1 meter. Frequency response is reported to be 40 Hz to 18 kHz +/- 2 dB. Sensitivity is adjustable between + 4 dBu and -14 dBu for 100 dB SPL at 1 meter. Amplifier continuous power is 230 W LF, 110 W MF, and 100 W HF. Claimed THD is less than 0.03 percent up to 1 dB below clipping, while hum and noise are at least 100 dB below the clipping level.The user manual covers, positioning, connections, controls, specs, accessories and driver replacement. List price is $7,400 per pair with a five-year guarantee.