Back to the main page Back to category QSC K8 8Inch Two
musical instrument details
QSC K Series K8 2-Way Powered 8" Woofer 1000-Watt Active Loudspeaker
Estimated price for orientation: 649 $
Category: QSC K8 8Inch Two
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: QSC MPN: K8 BLK Type: PA Speaker Active/Passive: Active Model: K8 Country/Region of Manufacture: China UPC: 684284056016
Configuration: Trapezoidal 2-way
Transducers: Low-frequency: 8" cone transducer
High-frequency: 1.75" diaphragm compression driver
Frequency Response (-6 dB): 66 Hz - 18 kHz
Frequency Range (-10 dB): 61 Hz - 20 kHz
Nominal Coverage (-6 dB): 105° conical DMT
Maximum SPL1: 127 dB peak
AMPLIFIERS
Power Output2: 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance: XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼" MIC mode: 2260Ω balanced
RCA: 10 kΩ
Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 of full power): 100 VAC, 2.3 A ; 120 VAC, 2.01 A ; 230 VAC, 1.13 A
ENCLOSURE
Material: Impact resistant ABS
Finish: Black paint
Grille: Rugged powder-coated steel
Dimensions (HWD) inches: 17.7 × 11 × 10.6
Dimensions (HWD) mm: 450 x 280 x 269
Weight (Net): 27 lb / 12.2 kg
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | QSC |
| MPN: | K8 BLK | Type: | PA Speaker |
| Active/Passive: | Active | Model: | K8 |
| Country/Region of Manufacture: | China | UPC: | 684284056016 |
Configuration: Trapezoidal 2-way
Transducers: Low-frequency: 8" cone transducer
High-frequency: 1.75" diaphragm compression driver
Frequency Response (-6 dB): 66 Hz - 18 kHz
Frequency Range (-10 dB): 61 Hz - 20 kHz
Nominal Coverage (-6 dB): 105° conical DMT
Maximum SPL1: 127 dB peak
AMPLIFIERS
Power Output2: 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance: XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼" MIC mode: 2260Ω balanced
RCA: 10 kΩ
Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 of full power): 100 VAC, 2.3 A ; 120 VAC, 2.01 A ; 230 VAC, 1.13 A
ENCLOSURE
Material: Impact resistant ABS
Finish: Black paint
Grille: Rugged powder-coated steel
Dimensions (HWD) inches: 17.7 × 11 × 10.6
Dimensions (HWD) mm: 450 x 280 x 269
Weight (Net): 27 lb / 12.2 kg